pic: Team 399 Claw Prototype 2 - Roller Claw(In Progress) [Archive]

View Full Version : pic: Team 399 Claw Prototype 2 - Roller Claw(In Progress)

Jeremy Germita

15-02-2011, 10:28

[cdm-description=photo]36362[/cdm-description]

Cory

15-02-2011, 10:29

Hopefully you mean polycarbonate and are just referring to it as plexi. If you are using plexiglass (acrylic), it's going to shatter.

IndySam

15-02-2011, 10:30

Cory beat me to it. Any kind of acrylic will be a disaster. Polycarb is the only way to go.

Chris is me

15-02-2011, 10:42

If it were acrylic, wouldn't it shatter in the waterjet?

5/8" polycarbonate is honestly probably overkill. 3/8" polycarbonate is quite hefty by itself.

Jeremy Germita

15-02-2011, 11:12

I was told it was plexi. I will check again with the team member who designed it.

If we do use the polycarb, we might put LED's inside for the feeder signal light. Imagine a color changing claw!

Also, I forgot to thank NASA Dryden for the WaterJetting!

IndySam

15-02-2011, 11:17

If it were acrylic, wouldn't it shatter in the waterjet?

5/8" polycarbonate is honestly probably overkill. 3/8" polycarbonate is quite hefty by itself.

No you can cut acrylic fine in a waterjet. You can even cut glass.