Problem with KOP Photosensors

[cruton55]

Is anyone else having trouble with their photosensors? Ours only want to work sometimes...

[DonRotolo]

Nope. Ours detect the line rock solid.
What are you trying to detect, against what background? Do you know there is a sensitivity adjustment?

[cruton55]

one of our three sensors seems to be a bit glitchy, it works for atmost 20min then randomly it detects nothing. the other two sensors work fine though. The "tuneing knob" if you will has no effect on it almost as if the sensors become frozen. only after an extended period of time does it work again. any suggestions?

[WizenedEE]

one of our three sensors seems to be a bit glitchy, it works for atmost 20min then randomly it detects nothing. the other two sensors work fine though. The "tuneing knob" if you will has no effect on it almost as if the sensors become frozen. only after an extended period of time does it work again. any suggestions?

The tuning knobs might have broken off on the inside from turning it past the stop point. If you take the plastic bit off, there's a normal-looking trim pot in there, which you can adjust with a small philips head.

Make sure everyone knows not to turn the working ones past the stops.

[Alan Anderson]

Is your battery voltage dropping below the 10.4 volts required for proper operation of the photosensor? See Team Update #5 for an approved way to avoid this problem.

[cruton55]

Thanks to team 3238! were pretty sure we can fix them now and will try it first thing tomorrow :)