Log in

View Full Version : Tetrix Bearing Size

team63
16-03-2011, 08:18
Does any one know the OD and ID of the Tetrix Pivot Bearings?
Bruceb
16-03-2011, 08:59
If you are talking about the bronze bushings I believe they are 3/16 id and 5/16 od.
Bruce
rees2001
16-03-2011, 09:37
The OD is .315", the id is .115".

good luck
IKE
16-03-2011, 09:54
The OD is .315", the id is .115".

good luck

Assuming you are talking about the servo bearing.

id is 3mm
OD is 8mm

It is about 3mm wide. It comes with a screw, nut and a couple of washers.
rees2001
16-03-2011, 20:45
Assuming you are talking about the servo bearing.

id is 3mm
OD is 8mm

It is about 3mm wide. It comes with a screw, nut and a couple of washers.

Yep, the servo bearing. I just checked it quick with a set of calipers. I tried a 3mm screw but it didn't fit in the one I checked.