pic: Team 125 - 2011 Robot

[Daniel Brim]

[cdm-description=photo]36705[/cdm-description]

[Akash Rastogi]

The NUtrons were easily dominant at the Bayou regional, I was very surprised by the loss in the finals. Props to Brandon, KB and the entire crew for a great machine!

[Daniel Brim]

Correction: Actual top speed is 18 ft/s, not 14.

Videos will be uploaded in the coming days.

[r2davis2]

I must say you guys had an amazing robot, and we were cheering you on the entire way

[akoscielski3]

Wow this robot looks almost exactly like 1114 with almost the same specs
only difference i see is the gripper is a little different
same mini bot deployment too

[Jimmy the Kidd]

We appreciate the competition at Bayou. You guys did really well. Great bot too.

[bhweezer]

Awesome bot. It was by far my favorite at Bayou.

[Tom Bottiglieri]

Thanks for the compliments on our bot. We were pretty pleased with our performance this weekend, especially this: http://www.youtube.com/watch?v=gBIewsiB-gY

[sdcantrell56]

Thanks for the compliments on our bot. We were pretty pleased with our performance this weekend, especially this: http://www.youtube.com/watch?v=gBIewsiB-gY

Wow! Thats the most impressive auton Ive seen yet. We're hoping to be able to pull that off at our next regional. It's certainly going to require some work to even get close to that.

[racesick222]

Great looking robot this year guys. Can't wait to play with you guys at Boston.

[Brandon Holley]

Great looking robot this year guys. Can't wait to play with you guys at Boston.

Same here. Maybe we can actually get on an alliance together, for once.


Thanks for the compliments everyone!

-Brando

[Michael Corsetto]

Thanks for the compliments on our bot. We were pretty pleased with our performance this weekend, especially this: http://www.youtube.com/watch?v=gBIewsiB-gY

What sensors did you use to for this autonomous routine? I'm trying to understand why you went for such a far peg (and then tossed the ubertube, so ridiculously awesome).

[Andrew Bates]

The sensors used are encoders in the drivetrain and elevator, bump sensor in the roller claw to detect when a tube is fully possessed, and a gyro to help with heading and turns. Tom can explain more about how the sensors were implemented in the coding.

[Tom Bottiglieri]

I'm trying to understand why you went for such a far peg (and then tossed the ubertube, so ridiculously awesome).
Here's the quick answer: We missed, and got kind of lucky.

For some reason, our robot over shot its second turn a bunch in that match either due to miscalibration (yuck 775 case shorts) or the fact that we smacked into another robot first. We had a safety in the code that would release the tube at full speed at 14.75 seconds into the match, and that caused the toss. Realistically this mode should have looked more like what team 33 or 148 did. I'm not complaining though.

[fireyoshi]

Thank goodness we never had to face each other at Bayou. :P But on a serious note, this is an amazing robot that got soooo close to winning it all. I know you guys will do amazing in Boston. Good luck!

[ChristopherSD]

Thanks for the compliments on our bot. We were pretty pleased with our performance this weekend, especially this: http://www.youtube.com/watch?v=gBIewsiB-gY

The autonomous looks amazing.

[Daniel Brim]

My favorite match from the competition:

http://www.youtube.com/watch?v=5f4I2zkVO98

Especially the pick-up/scoring of the first square. When I said all orientations, I meant all orientations.

[R.C.]

Thanks for the compliments on our bot. We were pretty pleased with our performance this weekend, especially this: http://www.youtube.com/watch?v=gBIewsiB-gY

That is one amazing auto!

-RC

[ejSabathia]

This was one of my favorite robots this year.

[Gary.C]

IMO one of the best robots that didn't go to champs this year. Great job guys

[Andrew Bates]

Thanks, we certainly appreciate the praise. Hopefully at our offseason competitions we'll break out of that 2nd place rut we've been in...