[FRC-Designs.com] 2012 CAD Challenge

[Starke]

http://frc-designs.com/images/content/header.jpg
FRC Designs: www.frc-designs.com
FRC Designs Blog: www.frc-designs.blogspot.com (www.frc-designs.com)

2012 FRC Designs CAD Challenge

With less than three weeks until the start of the 2012 FRC season, FRC Designs is presenting a challenge to all FRC Teams:

Make a commitment to design your robot in CAD and submit your design to FRC Designs.

Computer Aided Design (CAD) is a useful tool that allows your team to design, prototype, and create your entire robot. For examples of full robot and subsystem CAD, check out the FRC Designs website (http://www.frc-designs.com/). There are three main CAD software programs including Autodesk Inventor (http://usa.autodesk.com/autodesk-inventor/), Solidworks (http://www.solidworks.com/), and Pro E.

The goal of FRC Designs is to create a continuous improvement of competition among teams in future FRC competitions. This collaborative effort will give teams the ability to innovate on solutions that have been successfully used in previous competitions.

Will your team commit to FRC Designs? Please reply to this thread to show your commitment and thoughts about FRC Designs.

Your commitment will also be posted on the FRC Designs 2012 Page here (http://www.frc-designs.com/html/2012.html). Thanks for your help!

Matt

[avanboekel]

Team 2338 accepts the challenge!

[BurkeHalderman]

Team 3266 accepts the challenge!

[stundt1]

Team 578 accepts the challenge!:]

[I LOVE ROBOTS!]

1730 accepts

[Nemo]

Team 967 accepts!

[Mk.32]

Team 3647 says: BRING IT.

[akoscielski3]

Team 772 accept the challenge!

[MattC9]

2158, graciously accepts.

[Rangel(kf7fdb)]

http://fak3r.com/wp-content/blogs.dir/12/files/challenge_accepted_Amazing_Feats_Fails_WIns_Lolz_a nd_A_Contest-s325x265-158648-535.png

[Team 3705]

Not too sure, but if I can get the members, then maybe..

Team 3705 will participate!

[Ninja_Bait]

Challenge accepted, good sir.

[JohnSchneider]

3310 will do our best

[Ankit S.]

Team 2489 accepts the challenge!

[Astechz_Nick]

Team 2994 accepts.
I'll see about getting our Logomotion robot on the site as well :)

[Duke461]

On behalf of Caterpillar, Purdue University, The Indiana Department of Workforce Development, Arby's, Arni's, Bruno's, Chick-fil-a, Domino's, Einstein's, Gensic Engineering, Hotbox, Indiana State Poultry Association, Klumpe Upholstery, LifeSmiles Dentistry, Little Caesar's, Papa Johns, Payless, Purdue Korean Catholic Student Association, Reliable Insurance Solutions, Speaker's Travel, Sports etc., Strategic Analytics, West Lafayette Jr./Sr. High School, West Lafayette Kumon Center, and all the parent and doctor sponsors, team 461, Westside Boiler Invasion, graciously accepts.



:P
P.S. Please don't report for advertising! It's simply a joke on the alliance selections at competitions! :o :D
*After reading the P.S.* *Ohhhhh is see what you did there* :P

[Starke]

Currently 15 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


461 – Westside Boiler Invasion
578 – Fairport Robotics
694 – StuyPulse
772 – Sabre Bytes
842 – Falcon Robotics
967 – Iron Lions
1730 – Team Driven
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2994 - Astechz
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots

[Starke]

More teams are wanted to join FRC Designs! See this thread page (http://www.chiefdelphi.com/forums/showthread.php?t=98904) for more details!

[BRADreid781]

Team 781, The Kinetic Knights will have a CADed 2012 robot to submit.

[msimon785]

Team 1515 graciously accepts! And expect to see our 2011 robot, Rob 2.0 up there soon.

[Starke]

Currently 17 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


461 – Westside Boiler Invasion
578 – Fairport Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1515 – MorTorq
1730 – Team Driven
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2994 - Astechz
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots

[baronep]

Team 2848 - Jesuit All-Sparks is way ahead of ya!

[Starke]

Currently 18 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?

461 – Westside Boiler Invasion
578 – Fairport Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1515 – MorTorq
1730 – Team Driven
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2848 – Jesuit All-Sparks
2994 - Astechz
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots

[Grim Tuesday]

Bumping to add team 639 to the list of teams who will commit to sending our CAD in.

[Andrew Lawrence]

http://25.media.tumblr.com/tumblr_lfgcg5qzsl1qbvc38o1_400.jpg

[Starke]

Currently 20 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


461 – Westside Boiler Invasion
578 – Fairport Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1515 – MorTorq
1730 – Team Driven
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2848 – Jesuit All-Sparks
2994 – Astechz
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots

[GRT808]

Glad to see this site up, I've learned a lot about the different methods other teams have incorporated into robot design. 3008 is eager to participate!

[Starke]

Currently 22 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


256 – Robo Rams
461 – Westside Boiler Invasion
578 – Fairport Robotics
639 – Code Red Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1515 – MorTorq
1730 – Team Driven
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2587 – The Discobots
2848 – Jesuit All-Sparks
2994 – Astechz
3008 – Kalani Falcons
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots

[Akash Rastogi]

I think 3929 will be able to add our 2012 robot CAD at the end of the season.

[Hawiian Cadder]

Team 159 will be uploading our 2012 robot.

[Starke]

Currently 24 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


159 - Alpine Robotics
256 – Robo Rams
461 – Westside Boiler Invasion
578 – Fairport Robotics
639 – Code Red Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1515 – MorTorq
1730 – Team Driven
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2587 – The Discobots
2848 – Jesuit All-Sparks
2994 – Astechz
3008 – Kalani Falcons
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots
3929 - Atomic Dragons

[willzone1]

FRC Team 246 accepts the challenge!

[eedoga]

2980 accepts

[Starke]

Currently 26 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?

159 – Alpine Robotics
246 – Overclocked
256 – Robo Rams
461 – Westside Boiler Invasion
578 – Fairport Robotics
639 – Code Red Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1515 – MorTorq
1730 – Team Driven
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2587 – The Discobots
2848 – Jesuit All-Sparks
2980 – Whidbey Island Wild Cats
2994 – Astechz
3008 – Kalani Falcons
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots
3929 – Atomic Dragons

[pigpenguin]

Team 1160 - Titanium Robotics accepts the challenge, Additionally I will see what we can do about getting our 2011 robot up as well

[Starke]

Currently 27 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


159 – Alpine Robotics
246 – Overclocked
256 – Robo Rams
461 – Westside Boiler Invasion
578 – Red Raider Robotics
639 – Code Red Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1160 - Titanium Robotics
1515 – MorTorq
1730 – Team Driven
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2587 – The Discobots
2848 – Jesuit All-Sparks
2980 – Whidbey Island Wild Cats
2994 – Astechz
3008 – Kalani Falcons
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots
3929 – Atomic Dragons

[Grim Tuesday]

We accept; we should have you a CAD in a few days (more like two weeks).

[Andrew Lawrence]

We designed our robot a bit backwards actually. We made the robot, and now we're getting the CAD people to mock it up in CAD. It's not the best way of doing these things, but we're using this year as our learning year for CAD.

[stundt1]

Hey Matt,
Can you change the name from fairport robotics to Red Raider Robotics?
If possible.

Our cad is coming along great we are doing a great job for our First year :)

Will have it sent after build season ends for final touches .

[Starke]

Hey Matt,
Can you change the name from fairport robotics to Red Raider Robotics?
If possible.

Our cad is coming along great we are doing a great job for our First year :)

Will have it sent after build season ends for final touches .

No problem! I just fixed it! Spread the word about FRC Designs!

[Alex.q]

We designed our robot a bit backwards actually. We made the robot, and now we're getting the CAD people to mock it up in CAD. It's not the best way of doing these things, but we're using this year as our learning year for CAD.

Thats what I did my first year when I was teaching myself CAD. Even if its not "the right way" to do it, the experience will make the CADing go faster next year. Additionally, documenting the design for after ship day (or bag day now I guess) can come in handy if you decide to use your holdback allowance to retrofit something and need to know what the dimensions were.

Back to the topic in the thread, I believe that Team 2220 Blue Twilight will accept.

[Starke]

Currently 28 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


159 – Alpine Robotics
246 – Overclocked
256 – Robo Rams
461 – Westside Boiler Invasion
578 – Red Raider Robotics
639 – Code Red Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1160 - Titanium Robotics
1515 – MorTorq
1730 – Team Driven
2220 - Blue Twilight
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2587 – The Discobots
2848 – Jesuit All-Sparks
2980 – Whidbey Island Wild Cats
2994 – Astechz
3008 – Kalani Falcons
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots
3929 – Atomic Dragons

[DavidGitz]

1208 accepts. I will submit our design tonight.

[Starke]

Currently 29 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


159 – Alpine Robotics
246 – Overclocked
256 – Robo Rams
461 – Westside Boiler Invasion
578 – Red Raider Robotics
639 – Code Red Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1160 - Titanium Robotics
1208 - MeTool Brigade
1515 – MorTorq
1730 – Team Driven
2220 - Blue Twilight
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2587 – The Discobots
2848 – Jesuit All-Sparks
2980 – Whidbey Island Wild Cats
2994 – Astechz
3008 – Kalani Falcons
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots
3929 – Atomic Dragons

[Duke461]

Is there a deadline to send the CAD to you guys? Also, are you interested in us giving you our Inventor Publisher design submission videos too?

Thanks,
-Duke

[Starke]

Is there a deadline to send the CAD to you guys? Also, are you interested in us giving you our Inventor Publisher design submission videos too?

Thanks,
-Duke

Duke,

Thanks for the question! Due to the rush of build and competition season, there is no official deadline for submissions. I will update the site as they come in! Also, I would love to add a link to Inventor Publisher videos if they have already been put online (Ex: Youtube). Thanks!

Matt

[AllenGregoryIV]

Spectrum should be able to send you our CAD files pretty soon, so you can add us to the list as well.

[Starke]

Spectrum should be able to send you our CAD files pretty soon, so you can add us to the list as well.

Sounds great! Thanks!

Currently 30 teams have joined FRC Designs with their 2012 CAD Challenge! See the list below. Will your team join the group?


159 – Alpine Robotics
246 – Overclocked
256 – Robo Rams
461 – Westside Boiler Invasion
578 – Red Raider Robotics
639 – Code Red Robotics
694 – StuyPulse
772 – Sabre Bytes
781 – The Kinetic Knights
842 – Falcon Robotics
967 – Iron Lions
1160 - Titanium Robotics
1208 - MeTool Brigade
1515 – MorTorq
1730 – Team Driven
2220 - Blue Twilight
2158 – ausTIN Cans
2338 – Gear it Forward
2489 – Insomniacs
2587 – The Discobots
2848 – Jesuit All-Sparks
2980 – Whidbey Island Wild Cats
2994 – Astechz
3008 – Kalani Falcons
3266 – Robots-R-Us
3310 – Team Black Hawk
3647 – Millennium Falcons
3705 – Arrowbots
3847 - Spectrum
3929 – Atomic Dragons

[Grim Tuesday]

Just a note to teams who use Inventor:

Inventor Publisher is nice, but if you want an actually good looking render (and one that doesn't crash every 10 minutes), try Autodesk Showcase. It looks MUCH better than Inventor, and is free if your school buys the suite. Might even be free to FRC teams, too.

[Starke]

@FRCDesigns (http://www.twitter.com/FRCDesigns)

Sabre Bytes FRC#772 Just submitted their 2012 robot CAD to FRC Designs! Check it out! http://www.frc-designs.com/html/CAD_2012.html

[Starke]

Now that the 2012 Competition season is over, FRC Designs is looking to add to their CAD Database! Please submit your CAD from the past year!

http://www.frc-designs.com/html/CAD_2012.html

Matt

[JohnSchneider]

Now that the 2012 Competition season is over, FRC Designs is looking to add to their CAD Database! Please submit your CAD from the past year!

http://www.frc-designs.com/html/CAD_2012.html

Matt

we need to fix a few things and add in all the small components to make it perfect ;) well get on that sometime in the near near future for ya!

[n1ckd2012]

we need to fix a few things and add in all the small components to make it perfect ;) well get on that sometime in the near near future for ya!

Same!

[ecchorobotics]

75 will upload six designs, from 2007 to 2012.

[Starke]

75 will upload six designs, from 2007 to 2012.

Awesome! I look forward to it!

The EngineeNERDs (2337) just added their 2012 CAD to FRC Designs! Check it out!

http://www.frc-designs.com/html/CAD_2012.html

Matt

[M. Mellott]

Teams 48 and 3193 will be submitting our 2012 robots (both variants), arm, and drivetrain--we're just taking the opportunity to clean up the models and include details that were added "on the fly".

[Starke]

MorTorq - FRC 1515 Joined FRC Designs with their 2012 robot! Check out the link below!

FRC Designs 2012 Robots: http://www.frc-designs.com/html/CAD_2012.html

[Gray Adams]

I might finish our robot in the next couple weeks. Trying to collect models of a few missing components if they still exist. The fact that I'm trying to put in almost every single thing isn't really helping this time line.

The progress so far:
http://gyazo.com/a4ba255c426ffd203d76053c7657bd74.png

[the.miler]

As soon as we are finished cleaning up the CAD model, Team 846 will have our 2012 robot model ready for you guys!

Video is here: http://www.youtube.com/watch?v=b1Ds_PCCGuo