Chief Delphi - Open Chassis Qs?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Open Chassis Qs? (http://www.chiefdelphi.com/forums/showthread.php?t=100014)

FRC3883FRC

13-01-2012 10:00

Open Chassis Qs?

Hey guys i have tried serching the forums all ready but my team is thinking of an open end chassis. We know that there must be 8" of bumpers on each end around the corners. Our robot is 27 in wide so that leaves 11" gap. Just wanted to make sure there is no rule about having and open spot in the chassis. I have gone through the rules and it looks like its good to go just want to make sure.

MrForbes

13-01-2012 10:05

Re: Open Chassis Qs?

We haven't found any rule prohibiting it, so we plan on having a 20" open side on our "wide" robot.

FRC3883FRC

13-01-2012 10:07

Re: Open Chassis Qs?

Cool thanks. Didnt want to get to far and then have to start all over! hope to be posting pics soon!

SenorZ

13-01-2012 10:22

Re: Open Chassis Qs?

We're going wide, with an opening, too. Just make sure you don't have any breakable bits near that opening unprotected.

Brandon Zalinsky

13-01-2012 10:38

Re: Open Chassis Qs?

As an extension of that, do you need to put your team number on the open side if there's only 8" on each side? I saw in the manual that the number had to be in the center.

MrForbes

13-01-2012 10:56

Re: Open Chassis Qs?

The manual does not say the number needs to be centered on the bumper.

Quote:

[R35]

Teams shall display their team number on the Bumpers in four locations at approximately 90° intervals around the perimeter of the Robot. The numerals must be at least 4 in. high, at least ¾ in. in stroke width, and be either white in color or outlined in white. Team numbers must be clearly visible from a distance of not less than 100 ft, so that judges, referees, and announcers can easily identify competing Robots.

Brandon Zalinsky

15-01-2012 12:24

Re: Open Chassis Qs?

sweet, thanks.

All times are GMT -5. The time now is 05:19.