Chief Delphi - Can not connect to Real-Time target

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Can not connect to Real-Time target (http://www.chiefdelphi.com/forums/showthread.php?t=100174)

Doc543

14-01-2012 13:34

Can not connect to Real-Time target

I'm trying to deploy code on our robot, I just re-imaged it with with the new 2012 LabVIEW. I am trying to push the run button on the robot main so i can get feedback to the gyro. I keep getting an error that says that "Can not connect to Real-Time target" I'm connected to it and can talk to it, what is going on?

tilky

14-01-2012 19:49

Re: Can not connect to Real-Time target

unlike last year, the module that connects to the digital sidecar has to be in slot 2, not slot 4. We had the same problem until we changed it.

Doc543

14-01-2012 22:14

Re: Can not connect to Real-Time target

never mind the C-RIO broke anyway

Greg McKaskle

15-01-2012 08:31

Re: Can not connect to Real-Time target

Any details about what broke?

Greg McKaskle

Alan Anderson

15-01-2012 17:10

Re: Can not connect to Real-Time target

Quote:

Originally Posted by Doc543 (Post 1105338)

I keep getting an error that says that "Can not connect to Real-Time target"

Did you set the IP address correctly in the project? Is your programming computer using a compatible address?

Doc543

16-01-2012 13:49

Re: Can not connect to Real-Time target

yes, yes, and yes I cant even ping the thing anymore, is the a way to reset the ip on it , there might be a chance we can save it.

rsisk

16-01-2012 15:49

Re: Can not connect to Real-Time target

Make sure Windows Firewall is turned off.

Doc543

17-01-2012 00:38

Re: Can not connect to Real-Time target

It was working fine, i could talk to it, image it and ping it, all of a sudden, it just stopped talking to me, I am suspecting a bad image, I was changing back and forth from Java to LabVIEW. Could I send it in and get it formatted at NI?

rsisk

17-01-2012 07:24

Re: Can not connect to Real-Time target

You can format the cRIO yourself using the FRC cRIO Imaging Tool. It should be on your desktop after you install Labview

ww2freak8

17-01-2012 09:20

Re: Can not connect to Real-Time target

If I'm not mistaken you can reimage the c-rio using the imaging tool from labview. Our team ram into a problem were we had to turn off the wireless card and firewall to get it to image correctly.

Doc543

17-01-2012 18:56

Re: Can not connect to Real-Time target

Well i cant even ping it, ive turned off all other network connections and it sill wont respond to pings and the imaging tool wont find it

Joe Ross

18-01-2012 13:29

Re: Can not connect to Real-Time target

Quote:

Originally Posted by Doc543 (Post 1107921)

Well i cant even ping it, ive turned off all other network connections and it sill wont respond to pings and the imaging tool wont find it

If you put it in safe mode, can the imaging tool see it?

All times are GMT -5. The time now is 09:33.