Chief Delphi - Team 250 Teaser

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)

- - Team 250 Teaser (http://www.chiefdelphi.com/forums/showthread.php?t=100528)

Bruceb

18-01-2012 13:58

Re: Team 250 Teaser

how thick and what type of aluminum are you using?
Bruce

EricPalmatier

18-01-2012 14:55

Re: Team 250 Teaser

Quote:

Originally Posted by Bruceb (Post 1108425)

how thick and what type of aluminum are you using?
Bruce

I believe it is just standard 6160 aluminium. It is 3/16" thick. For the teaser shot, the part was polished on a buffing wheel. As we complete the parts we will most likely continue to polish these side plates as it takes all of the burrs off. And they just look amazing polished to a mirrored finish! :D

372 lives on

18-01-2012 14:59

Re: Team 250 Teaser

Quote:

Originally Posted by SenorZ (Post 1108141)

Aphex Twin's newest release?

http://bit.ly/cCDjQw

obvious answer is obvious.

JosephC

18-01-2012 15:13

Re: Team 250 Teaser

Quote:

Originally Posted by EricPalmatier (Post 1108466)

I believe it is just standard 6160 aluminium. It is 3/16" thick. For the teaser shot, the part was polished on a buffing wheel. As we complete the parts we will most likely continue to polish these side plates as it takes all of the burrs off. And they just look amazing polished to a mirrored finish! :D

I win!

EricPalmatier

18-01-2012 15:34

Re: Team 250 Teaser

And for those interested, here is a video of the final part being cut out on the Flojet. Much thanks to RPI and Larry Ruff for helping us out with this part of the production!
http://youtu.be/eqTX2HVc268

EricPalmatier

19-01-2012 10:09

Re: Team 250 Teaser

Click here to see a video of the final part being cut out on the Flojet.

All times are GMT -5. The time now is 17:17.

Page 2 of 2

Show 100 post(s) from this thread on one page