Chief Delphi - Programming Kinect

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Programming Kinect (http://www.chiefdelphi.com/forums/showthread.php?t=100557)

Mark McLeod

25-01-2012 10:26

Re: Programming Kinect

FIRST is looking at this problem of some PCs not passing on the Kinect data.

NeatTeam

25-01-2012 10:36

Re: Programming Kinect

Ok thanks, I guess we will stay tuned and we're hoping for some good news anytime soon.
:)

Mark McLeod

26-01-2012 11:11

Re: Programming Kinect

Okay, FIRST thinks that the issue seems to be due to a conflict with the missing Cypress IO board.

Here are some temporary solutions to try.
Please, report back if this helps or fails.

See if plugging your Cypress board USB in makes it all better.

Go to the Driver station I/O tab, click Configure and change it to Compatible mode to see if that makes the Kinect data work.

All times are GMT -5. The time now is 22:32.

Page 2 of 2

Show 100 post(s) from this thread on one page