No Robot Code on Driver Station
 

If anyone could help that would be great!

• Using Windriver
  Updates currently installed: Workbench, utilities, and driver station
  Driver station displays connection and shows the firmware v43 is currently installed on cRio
  We hit deploy on First<Deploy when using Windriver
  No errors and displays in bottom - successfully deployed
  We have checked in cRio and found the file

On Driver Station

• Robot connection light green
  Robot Code light still red (not found)
  Continuously connects then disconnects

Re: No Robot Code on Driver Station
 

Try running a kernel task instead of deploying it and seeing if you get any errors such as an Unresolved Symbol. Are you using the new Command based methodology?

Re: No Robot Code on Driver Station
 

Get a target console up, and you should see some errors.

An easy one this year is if your modules are in the wrong slots. Whereas the digital sidecar was cRio slot 4 last year, it is now slot 2.

Slot 1: Analog
Slot 2: Digital
Slot 3: Solenoid

Re: No Robot Code on Driver Station
 

Go to window then Preferences and under First Downloader, make sure your team number is there and the path to your executable.