Calculating distance with an Axis Camera 206
 

My team is using an axis camera to calculate the distance to a target. The distances we are currently calculating are up to a foot off, depending on the location, lighting etc. The calculated distances are worse at angles. What accuracy range are other teams getting? Do you think the camera is the best way to get the distance? We have also done tests with the ultrasonic sensor which is sometimes very accurate and other times gives strange results.

Thank you.

Re: Calculating distance with an Axis Camera 206
 

How are you calculating the distance using the camera?

Greg McKaskle

Re: Calculating distance with an Axis Camera 206
 

I second this question. If you can't get better estimates from the axis camera, you might try using the camera as a sanity check for an ultrasonic sensor.

Re: Calculating distance with an Axis Camera 206
 

With any vision system, you could fill in the area of the "square" target that is found with the "edge detection". This way you get a solid square.

Once you have a soild square, now run an "area detection" of the square.

This will get you a size. The bigger the area, the closer you are. The smaller the area, the further away you are.

Re: Calculating distance with an Axis Camera 206
 

A smaller area could also mean you are just farther away from the line perpendicular to the target, even if you are the same distance from the target itself.

Citrus, what algorithm are you using to compute distance?

Re: Calculating distance with an Axis Camera 206
 

Would it be more accurate to use the ratio of size of the rectangle in comparison to the overall picture (ie. The smaller the rectangle in pixels, the farther away you are moving from it) and then using the length and width of the sides to calculate for angle?

And I'm one of those NEMs (Non-engineering Mentors) so the math escapes me completely here.

Re: Calculating distance with an Axis Camera 206
 

Can someone please post the documentation for detecting the squares and tracking them? I can't seem to find the PDF's or tutorials.

Thanks,
Eagle Engineering 1138

There are numerous algorithms... we are trying opencv with relatively little success.

Anyone else have better experiences with opencv?

Re: Calculating distance with an Axis Camera 206
 

With the range finder we received you shouldn't need to use the Axis camera. The real question is has anyone found information for coding the rangefinder?

Re: Calculating distance with an Axis Camera 206
 

It's analog. It outputs a voltage read as an analog channel.

Relating to OpenCV, this shouldn't be necessary on the cRio as NI Vision (CVI) is fairly optimized (and already compiled) for VxWorks.

Re: Calculating distance with an Axis Camera 206
 

Basically, yes. Involves a fair amount of trig, but this is how I am doing it, and it works well.

Re: Calculating distance with an Axis Camera 206
 

We are using the height of the target and comparing it to the height of the camera image.

About opencv...

I personally would like to mount a netbook on the robot

Re: Calculating distance with an Axis Camera 206
 

If you haven't already, you should read this white paper on vision and the axis camera. It is from National Instruments and is specific to this years competition. The url is https://decibel.ni.com/content/docs/DOC-20173

You may need to register to download. It provides good detail on the algorithm used and possible errors.

Re: Calculating distance with an Axis Camera 206
 

We are using OpenCV to track the vision target this year. I have been fiddling around with color tracking over the summer, so I have a little experience with it. I have been able to track the tape up to 16ft. away. Due to a lack of smoked polycarbonate, I don't have the actual vision target built yet.

Does anyone known how dense the polycarbonate is? All the manual says is "1/2 in. smoked polycarbonate" with no more description.

As far as determining distance, I thought using the target's relative size to the image size would be viable because the target is 2ft. wide.

What problems are you having with OpenCV? I'll try to help. Also you should get a hold of the book Learning OpenCV: Computer Vision with the OpenCV Library (ISBN: 978-0-596-51613-0). It's great for reference and (obviously) learning the basics.