Problem with cRio Imaging Tool. HELP!!!!!
 

We can't get the cRIO imaging tool open!! :( We've been trying for days, and we're getting behind because of it. Please help!!! :ahh:

Re: HELP!!!!!!!!!!!
 

Try posting with a meaningful and concise subject line.

You will get more help that way.

Also, but more specific: what do you mean when you say you "can't get the cRIO imaging tool open".

Re: HELP!!!!!!!!!!!
 

yep... we need to know more so we can try to help.

Operating system. Describe the steps you follow and where/how/if you get some error. Screenshots are helpful too.

Did you install the updates for labview, utils and driver station?
Links to those updates are at the bottom of this page:
http://www.usfirst.org/roboticsprogr...control-system

Also, you may consider posting in the forums at http://ni.com/frc -- NI employees often lend a hand there.

Good luck!
David

Re: HELP!!!!!!!!!!!
 

We went to utilitys in the updated version of LabVIEW and clicked on "cRIO Imaging Tool" but the button must be broken because the window won't open. I also found another way to open it. Under tools in the tool bar, but when I click on the link it opens the window for half a second and closes it again. We have to get it to open so we can configure the cRIO. Does that help at all with the explanation? I hope it does.

Re: HELP!!!!!!!!!!!
 

Did you download and install the updates and utilities for LabVIEW?

Re: HELP!!!!!!!!!!!
 

Yes. We have all the updates. I checked today for anymore and there are none.

Re: HELP!!!!!!!!!!!
 

Which updates do you have? It sounds like you might have missed the FRC Utilities one.