Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)
-   -   Serial-to-CAN adapter (http://www.chiefdelphi.com/forums/showthread.php?t=100723)

SpikeyBot293 20-01-2012 17:19
Serial-to-CAN adapter
 
Our serial-to-CAN adapter in the KOP was not assembled, as in the RJ11 connector wires were not plugged into the DB-9 connector. There appears to be no literature anywhere how to correctly assemble this adapter. Has anyone encountered this issue and found the assembly instructions?

dyanoshak 20-01-2012 17:26
Re: Serial-to-CAN adapter
 
Quote:
Originally Posted by SpikeyBot293 (Post 1109918)
Our serial-to-CAN adapter in the KOP was not assembled, as in the RJ11 connector wires were not plugged into the DB-9 connector. There appears to be no literature anywhere how to correctly assemble this adapter. Has anyone encountered this issue and found the assembly instructions?
Go to www.ti.com/jaguar and look for Getting Started (MDL-BDC24).

Look in the section titled "RS232 Cable" on page 26 for the adapter assembly instructions.

-David


All times are GMT -5. The time now is 09:51.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi