Particle Analysis Report Problems
 

I am trying to use camera tracking to track the reflective tape, but I am having problems with the frcParticleAnalysis function. I'm not sure how to use it. my code is:


#include "WPILib.h"

/**
* This is a demo program showing the use of the RobotBase class.
* The SimpleRobot class is the base of a robot application that will automatically call your
* Autonomous and OperatorControl methods at the right time as controlled by the switches on
* the driver station or the field controls.
*/
class RobotDemo : public SimpleRobot
{
RobotDrive myRobot; // robot drive system
Joystick stick; // only joystick
Jaguar jag1;
Jaguar jag2;
Solenoid Sol1 ;
Joystick stick2;
HSLImage image;
ParticleAnalysisReport par;
BinaryImage image2;



public:
RobotDemo(void):
myRobot(1, 3, 2, 10), // front left, rear left, front right, rear right
stick(1), //these must be initialized in the same order
jag1(7),
jag2(8),
Sol1(8),
stick2(2)


{
myRobot.SetExpiration(0.1);
}

/**
* Drive left & right motors for 2 seconds then stop
*/
void Autonomous(void)
{
myRobot.SetSafetyEnabled(false);
AxisCamera &camera = AxisCamera::GetInstance();
camera.WriteBrightness(0);
Wait(3.0);
myRobot.MecanumDrive_Cartesian(0.0, 0.0, 0.0, 0.0); // stop robot
while (!IsOperatorControl())
{
camera.GetImage();
frcParticleAnalysis(image2, 5, par); /*the error says "cannot convert 'BinaryImage' to 'Image*' for argument '1' to 'int frcParticleAnalysis (Image*, int, ParticleAnalysisReport*)'*/
}
}


/*
* Runs the motors with single stick holonomic steering.
* comment
*/
void OperatorControl(void)
{
while (IsOperatorControl())
{
myRobot.SetSafetyEnabled(true);
myRobot.MecanumDrive_Cartesian(stick.GetX(), stick.GetY(), stick.GetThrottle(), 0); // drive with arcade style (use right stick)
if(stick.GetTrigger())
jag2.SetSpeed(.8);
jag1.SetSpeed(.5);
Wait(.2);
Sol1.Set(true);
if(stick2.GetTrigger())
jag1.SetSpeed(.5);
else
Sol1.Set(false);
jag1.SetSpeed(0);
jag2.SetSpeed(0);
Wait(0.005); // wait for a motor update time
}
}


};

START_ROBOT_CLASS(RobotDemo);

Re: Particle Analysis Report Problems
 

You declare your variable image2 as a BinaryImage*, which is why the compiler is having trouble. It sees parameter 1's type as "BinaryImage*", but it is looking for Image*. Also, you don't assign anything out of your call to camera.GetImage(). It should be something like image2 = camera.GetImage() [except that might not be the right type. Check out AxisCamera.h to find out what GetImage() returns].

I don't have the code in front of me, but it is likely that what you need to do is do something like this:

ColorImage colorImage;
camera.getImage(&colorImage);
frcParticleAnalysis(&colorImage, 5, par);


However, we had success last night doing something different. We did something very similar to this. It is unlikely the code below or above will compile, it's coming out of memory.
ColorImage img;
camera.getImage(&img);
BinaryImage* binImg = img.ThresholdRGB(192,256,192,156,192,256);
vector<ParticleAnalysisReport>* particles = binImg->GetOrderedReport(); // I don't remember this function's actual name
for(int x = 0;x < particles.size(); x++)
{
ParticleAnalysisReport& par = (*particles)[x];
// do something with par: look at par.center_mass_x, par.center_mass_y, etc.
}

Re: Particle Analysis Report Problems
 

Could you please post you actual code when you come in? It looks really good and I'd really like for my team to have camera tracking this year. Thanks so much!

Re: Particle Analysis Report Problems
 

this is my autonomous code as it stands now. can you guys help me figure out what to do/where to go from here.


void Autonomous(void)
{
myRobot.SetSafetyEnabled(false);
AxisCamera &camera = AxisCamera::GetInstance();
camera.WriteBrightness(0);
Wait(3.0);
myRobot.MecanumDrive_Cartesian(0.0, 0.0, 0.0, 0.0); // stop robot
while (!IsOperatorControl())
{
/** ColorImage &colorImagel;
camera.GetImage(&colorImage);
frcParticleAnalysis(&colorImage, 5, par); **/
HSLImage img;
camera.GetImage(&img);
BinaryImage* binImg = img.ThresholdRGB(192, 256, 192, 156, 192, 256);
vector<ParticleAnalysisReport>* par = binImg->GetOrderedParticleAnalysisReports(); //warning: unused variable 'par'
for(int x = 0; x < 5/**par.x**/; x++)
{
ParticleAnalysisReport& par = (*particles)[x]; //error: 'particles' undeclared (first use this function)
int x;
par.center_mass_x = x;

//do something with particles: par.center_mass_x & par.center_mass_y
}
}
}

thanks for the help

Re: Particle Analysis Report Problems
 

This should get you started. The robot centering will be kinda jerky once you put the turning calls into myRobot, but should mostly work.

If you're focused JUST on autonomous however, don't forget the physical approach: put an aiming device on the robot, and have your drive team place and aim the robot using that. That removes the need to use the camera at all, mostly. You wouldn't get aiming in teleoperation mode, but if the goal is just autonomous, you can achieve it with just an on-robot aimer. It's actually what we did last year.

Re: Particle Analysis Report Problems
 

awesome, well I have one more error to fix then I can just wait until electrical and mechanical have there stuff finished...

BinaryImage* binImg = img.TresholdRGB(192, 256,156, 192, 256); //error: request for member 'ThresholdRGB' in 'image', which is of non-class type 'ColorImage*'

do I need to make img in to an RGB imag rather than just a Color Image?

Re: Particle Analysis Report Problems
 

You need to make it not a pointer.

The declaration for ColorImage should be:
ColorImage img;

From the compiler error, it sounds like you have
ColorImage* img;

That would be a pointer, which is why you can't do
img.ThresholdRGB(...)

Re: Particle Analysis Report Problems
 

ok, when I do that i get

ColorImage img; //error: no matching function for call to 'ColorImgae::ColorImage()'
camera.GetImage(&img);

if you want I'll post the whole code as it stands now if you think it'll help

Re: Particle Analysis Report Problems
 

Whoops, I forgot that ColorImage doesn't have a default constructor.

I believe it is:
ColorImage img(IMAQ_RGB_IMAGE);

You'll have to take a look at the constructor for ColorImage. Click on it, hit f3, and see what enumeration it requires. Hit f3 of the enumeration type, and it should take you to a list of options. You want the RGB one. Unfortunately, I'm once again at home, so I don't have our code in front of me.

Re: Particle Analysis Report Problems
 

the constructor is IMAQ_IMAGE_RGB but it works now thanks!

Re: Particle Analysis Report Problems
 

As I'm always saying to our students - code compiling doesn't mean the code works :-)

Re: Particle Analysis Report Problems
 

If you run into issues tracking with an RGB image, try using HSL instead.

- Bryce

Re: Particle Analysis Report Problems
 

I know... I meant built right...

Now that I've finially had a chance to test the code, I'm getting errors when we try to run it.

what do they mean? and...

do you think using a different image type would help?

Re: Particle Analysis Report Problems
 

They're all probably related to the same error. You'd have to post the exact code you're using to call the ThresholdRGB function for me to have a clue.

Edit: the code I posted above that has the ThresholdRGB call has a problem. It should be
ThresholdRGB(192,256,192,256,192,256)

I put a 156 where 256 should have been.

Re: Particle Analysis Report Problems
 

I'm going to comment only on this single correction about the 156 versus 256...

Threshold takes 8-bit numbers for its thresholds. 256 is **NOT** an 8-bit number. 8-bit numbers range from (unsigned) 0-255 or (signed) -127 to 128. If you are passing 256 into this routine, you are likely passing a ZERO or an invalid number based upon the way Threshold processes it or passes it to the imaq functions.

255 is a MAX number ....

bob