Chief Delphi - Setting RPMs on motors

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Setting RPMs on motors (http://www.chiefdelphi.com/forums/showthread.php?t=101022)

Ether

25-01-2012 10:15

Re: Setting RPMs on motors

Quote:

Originally Posted by davidthefat (Post 1113216)

You can use a PID Controller and use RPM as the unit.

Your post is shown in the "threaded display mode" as being a response to my post#14. Was that intentional or inadvertent?

RyanN

25-01-2012 10:16

Re: Setting RPMs on motors

Heck, with CAN now fully going and err... reliable?... you can use the Jaguar's Speed interface to control RPM.

It's legal this year, and it takes some of the overhead out of the programming, as well as making it respond better.

Just an idea.

I think Team Fusion is going this route.

Ether

25-01-2012 10:17

Re: Setting RPMs on motors

Quote:

Originally Posted by RyanN (Post 1113222)

you can use the Jaguar's Speed interface to control RPM.

http://www.chiefdelphi.com/forums/sh...84&postcount=5

davidthefat

25-01-2012 16:27

Re: Setting RPMs on motors

Quote:

Originally Posted by Ether (Post 1113221)

Your post is shown in the "threaded display mode" as being a response to my post#14. Was that intentional or inadvertent?

Unintentional; I just use the "quick reply" button, so I just click the closest one.

Ether

25-01-2012 16:34

Re: Setting RPMs on motors

Quote:

Originally Posted by davidthefat (Post 1113439)

I just use the "quick reply" button, so I just click the closest one.

Friendly suggestion: You might want to rethink that habit. Without any context in your post, the only clue regarding what you are responding to is the hierarchy in the threaded display mode.

All times are GMT -5. The time now is 18:55.

Page 2 of 2

Show 100 post(s) from this thread on one page