Polycord & Rollers for Conveyor Belt
 

Hi everyone,

Our team is planning to make a conveyor belt and we see that largely teams agree that polycord and rollers are the way to go.

We wanted to ask where to buy polycord, what type, diameter, length, etc?

Also, same questions for rollers.

On a side note, what kind of motors do you all use for this kind of mechanism, and how do you attach it to the roller?

Thanks!
-3992

Re: Polycord & Rollers for Conveyor Belt
 

Please run a search there are currently 7 active threads that discuss all of this on the sidebar of the portal posted to today alone.

http://www.chiefdelphi.com/forums/se...archid=3878439

Re: Polycord & Rollers for Conveyor Belt
 

You can buy polycord from McMaster-Carr, search for 'polyurethane belts' on http://www.mcmaster.com.
Many things will work for rollers/pulleys. You can buy them (very expensive), use wood dowels or PVC pipe amongst other ideas.

HTH

Re: Polycord & Rollers for Conveyor Belt
 

wireties, should I get solid core? What diameter do you recommend?

Re: Polycord & Rollers for Conveyor Belt
 

1/4" seems to be the choice of most FIRST teams, that is what we use. If you get solid core, you will need to be able to join the ends together. There are some great CD threads about doing this cheaply (w/o buying $500-$600 kits). The hollow cord will work fine and is easier to join the ends but I think the barbs (that hold the ends together) force one to use larger diameter pulleys/rollers.

HTH

Re: Polycord & Rollers for Conveyor Belt
 

Well if you want a quick look this is what our team did.