Chief Delphi - pic: Team 1510/2898 Chassis/Superstructure Frame

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Team 1510/2898 Chassis/Superstructure Frame (http://www.chiefdelphi.com/forums/showthread.php?t=101116)

Thad House

25-01-2012 13:47

pic: Team 1510/2898 Chassis/Superstructure Frame

loading photo ...

the man

25-01-2012 13:47

Re: pic: Team 1510/2898 Chassis/Superstructure Frame

Weight?

Thad House

25-01-2012 13:57

Re: pic: Team 1510/2898 Chassis/Superstructure Frame

Just under 20 lbs each

O'Sancheski

25-01-2012 14:03

Re: pic: Team 1510/2898 Chassis/Superstructure Frame

10WD?

Thad House

25-01-2012 14:05

Re: pic: Team 1510/2898 Chassis/Superstructure Frame

6WD. those things going out the side are bumper supports. Wheels go at each end and the center. Because all gaps are less then 8 inches they are legal

O'Sancheski

25-01-2012 14:13

Re: pic: Team 1510/2898 Chassis/Superstructure Frame

Quote:

Originally Posted by sst.thad (Post 1113346)

6WD. those things going out the side are bumper supports. Wheels go at each end and the center. Because all gaps are less then 8 inches they are legal

Gotcha. Fogot about the new bumper rules and how WCDs have to mount bumpers now.

Akash Rastogi

26-01-2012 01:57

Re: pic: Team 1510/2898 Chassis/Superstructure Frame

These are looking really nice. I'm pretty jealous!

MrBasse

29-01-2012 00:23

Re: pic: Team 1510/2898 Chassis/Superstructure Frame

What made you decide to use only one fastener on each leg of the superstructure? How close to square is it when forces are applied from the sides?

Thad House

29-01-2012 01:48

Re: pic: Team 1510/2898 Chassis/Superstructure Frame

We used 1 bolt because thats all we could fit well with 1x1 extrusion. Since this picture was taken alot of extra support has been added. students can sit on top and it supports very well.

All times are GMT -5. The time now is 11:22.