Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Default code (http://www.chiefdelphi.com/forums/showthread.php?t=101129)

Hebrew 25-01-2012 16:33
Default code
 
Do I have to edit the default code to get a motor hookup to work? I have deployed an unchanged code, all lights are green, and the motor is not running with joystick 1.

I get an axis camer not found in the driver station log as my only error and it is running through a jaguar. PWM 1 and 2 are hooked up with the three prong slot

Mike AA 25-01-2012 19:53
Re: Default code
 
Quote:
Originally Posted by Hebrew (Post 1113442)
Do I have to edit the default code to get a motor hookup to work? I have deployed an unchanged code, all lights are green, and the motor is not running with joystick 1.

I get an axis camer not found in the driver station log as my only error and it is running through a jaguar. PWM 1 and 2 are hooked up with the three prong slot
Is the light on the Jag solid or flashing orange? Did you image the Crio? Did you enable the robot on the driver station?


All times are GMT -5. The time now is 11:38.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi