Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Team 1296 teaser!!! (http://www.chiefdelphi.com/forums/showthread.php?t=101477)

Ben27Lacrosse 29-01-2012 15:34

pic: Team 1296 teaser!!!
 

Rangel 29-01-2012 15:36

Re: pic: Team 1296 teaser!!!
 
Manipulating balls from all four sides I see. Seems familiar. ;)

Make sure you get some serious driver practice in. Driving this to its maximum effectiveness may be harder than you think it is.

wireties 29-01-2012 15:44

Re: pic: Team 1296 teaser!!!
 
... it is the same drive system as last year and the same drive team is back - our schedule includes a full week of practice (and we have a practice bot), we are hoping for the best

Flimsor 29-01-2012 16:30

Re: pic: Team 1296 teaser!!!
 
Interesting. I am interested in finding out how you can pick up the balls. Also, it'l take ALOT of practice to balance. Hopefully your maneuverabily keeps you from being pushed around.

JohnSchneider 29-01-2012 18:01

Re: pic: Team 1296 teaser!!!
 
Very Nice ;)

No matter how many times I see it that Home Depot Orange is always striking.

stephen 29-01-2012 18:41

Re: pic: Team 1296 teaser!!!
 
good idea good luck

Andrew Lawrence 29-01-2012 18:43

Re: pic: Team 1296 teaser!!!
 
Great looking base! However, it's not much of a teaser if you show the whole thing. :p

stephen 29-01-2012 18:47

Re: pic: Team 1296 teaser!!!
 
but wait if you have that small of a robot you need to be careful of other robots pushing you around when your not in the key

wireties 29-01-2012 18:58

Re: pic: Team 1296 teaser!!!
 
Quote:

Originally Posted by animenerdjohn (Post 1116045)
Very Nice ;)

No matter how many times I see it that Home Depot Orange is always striking.


uhm - that is yellowjacket orange!! ;o)

wireties 29-01-2012 18:59

Re: pic: Team 1296 teaser!!!
 
Quote:

Originally Posted by SuperNerd256 (Post 1116069)
Great looking base! However, it's not much of a teaser if you show the whole thing. :p


we are a 9th year team but rookie teasers!

wireties 29-01-2012 19:07

Re: pic: Team 1296 teaser!!!
 
Quote:

Originally Posted by stephen (Post 1116071)
but wait if you have that small of a robot you need to be careful of other robots pushing you around when your not in the key

The bot is full size & weight and with the shooter attached will be 54"" tall or so, the camera angle is deceiving. And we have had experiences contrary to the typical "mecanum gets pushed around" opinions on CD. Typically we just go around defensive bots or fake them out just enough to catch them on the corner and spin them around. Last year we had much the same drive train and had a bit of fun playing with 6-wheeled defenders.

I suppose we'll encounter better defense in regional finals or in St Louis but that is a nice problem to have (means you made it that far). Plus we can pull balls in from all 4 sides, hard to defend against us if there are 2 or more balls on the floor!

wireties 29-01-2012 19:08

Re: pic: Team 1296 teaser!!!
 
Quote:

Originally Posted by Flimsor (Post 1115953)
Interesting. I am interested in finding out how you can pick up the balls. Also, it'l take ALOT of practice to balance. Hopefully your maneuverabily keeps you from being pushed around.


A conveyor system will pull them in from all 4 sides to the center of the robot then vertically towards a 2-wheeled shooter.

Vikingtech2054 29-01-2012 19:45

Re: pic: Team 1296 teaser!!!
 
[/IMG]
Quote:

Originally Posted by Ben27Lacrosse (Post 1115920)


BlacksmithWoods 30-01-2012 22:26

Re: pic: Team 1296 teaser!!!
 
Cool, looks like your CIM motor limit is almost used up. What motors are you planning on using to pick the balls up and fire your launcher, if you are using a launcher. Also, how are you going to avoid the penalty of herding more than 3 balls at once. Once it is inside your frame it is considered to be "herded".

Kyler Hagler 30-01-2012 22:41

Re: pic: Team 1296 teaser!!!
 
Looks better in person!

wireties 30-01-2012 22:47

Re: pic: Team 1296 teaser!!!
 
Quote:

Originally Posted by BlacksmithWoods (Post 1116840)
Cool, looks like your CIM motor limit is almost used up. What motors are you planning on using to pick the balls up and fire your launcher, if you are using a launcher. Also, how are you going to avoid the penalty of herding more than 3 balls at once. Once it is inside your frame it is considered to be "herded".

We are using AndyMark and FP motors on the launcher wheel. The conveyors will run backwards to reject balls as well as pull them in.

Robert Voorhis 31-01-2012 21:25

Re: pic: Team 1296 teaser!!!
 
If you can only possess 3 balls at any given time, then how do you plan on controlling 4 different input systems?

JohnSchneider 31-01-2012 23:09

Re: pic: Team 1296 teaser!!!
 
Theyre all independently controlled. They dont have to intake balls so its pretty easy to control how many they posses.


All times are GMT -5. The time now is 23:52.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi