Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Ilummination for vision. (http://www.chiefdelphi.com/forums/showthread.php?t=101617)

asmsresearch 31-01-2012 11:46

Ilummination for vision.
 
Planning on using led array for image recognition software on robot powered by three AA bateries. Any comments or sugestions?

Jared Russell 31-01-2012 11:49

Re: Ilummination for vision.
 
AA batteries are not a legal power source according to http://frc-manual.usfirst.org/viewItem/57#4.1.7

You will need to modify your LEDs to be powered from the Power Distribution board, a Relay, or the Digital Sidecar.

bfk 31-01-2012 12:38

Re: Ilummination for vision.
 
We're using the ring lights from SuperbrightLeds.com. I think these are the same the one AndyMark had for FIRSTChoice. They run on 12 volts, draw very little current and make the retroreflective tape light up like a green searchlight.
The model we have is the AE60-G15; 15 green leds in a 60mm diameter ring which fits around the camera lens.
We got 2 for about $20 shipped. They arrived in Oregon three days after ordering.

Specs are here.


All times are GMT -5. The time now is 20:37.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi