Chief Delphi - how to use openCV?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - how to use openCV? (http://www.chiefdelphi.com/forums/showthread.php?t=101685)

PaulDavis1968

05-02-2012 12:13

Re: how to use openCV?

Quote:

Originally Posted by ganchara (Post 1118698)

if the code is in C++ where are you running it? on the driver station or the robot? My team is planning to run our image processing on the DS, which supposedly can't send data back to the robot while in C++.

I am going to use the JavaCV wrapper. But you could always send data using c++ you would just have to have code that talks to crio over the network.

Fischerk12

19-02-2012 15:48

Re: how to use openCV?

Ok we have been running into the issue of not having the wpijavacv libraries. Where can we get these or if we have them already where are they?

ganchara

19-02-2012 16:04

Re: how to use openCV?

they are downloaded with the smartdashboard

rdr2510

28-03-2013 08:35

Re: how to use openCV?

There is my code to use openCV 2.3 with delphi 7
http://www.developpez.net/forums/d13...i/#post7204310

All times are GMT -5. The time now is 18:47.

Page 2 of 2

Show 100 post(s) from this thread on one page