Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Shaker Robotics Complete Chassis (http://www.chiefdelphi.com/forums/showthread.php?t=101764)

JackS 02-02-2012 09:58

pic: Shaker Robotics Complete Chassis
 

Nick Lawrence 02-02-2012 09:59

Re: pic: Shaker Robotics Complete Chassis
 
Nice work 2791. Your chassis is solid, clean and very professional looking. Hats off to you guys, it's truly beautiful.

-Nick

1493kd 02-02-2012 10:02

Re: pic: Shaker Robotics Complete Chassis
 
Very nice looking, love the blue...

Looking forward to seeing it at the RPI Tech Park in a few weeks

DampRobot 02-02-2012 10:03

Re: pic: Shaker Robotics Complete Chassis
 
First of all, that is a pretty chassis. Powder coating always makes robots look more "professional."

I was wondering why you decided to go 6wd with a "wide" robot. Most teams decide to go 6wd with a dropped center to make it easier to turn a long robot. However, you already have the wide track width that is required to turn. Was there something else that factored into your decision?

sometimestommy 02-02-2012 10:07

Re: pic: Shaker Robotics Complete Chassis
 
Me Gusta! I really like to see powder coated frames! Are those the toughbox micros?

EricLeifermann 02-02-2012 10:08

Re: pic: Shaker Robotics Complete Chassis
 
Quote:

Originally Posted by DampRobot (Post 1118410)
First of all, that is a pretty chassis. Powder coating always makes robots look more "professional."

I was wondering why you decided to go 6wd with a "wide" robot. Most teams decide to go 6wd with a dropped center to make it easier to turn a long robot. However, you already have the wide track width that is required to turn. Was there something else that factored into your decision?

I assume that its so they can cross the barrier...

Nemo 02-02-2012 10:16

Re: pic: Shaker Robotics Complete Chassis
 
Very interesting gearboxes. It appears that you've decided to spend a bit of weight on an extra set of 2nd stage output gears in order to keep the center of gravity nice and low. Seems like a smart choice for a game with a barrier to traverse and a bridge to climb.

JackS 02-02-2012 10:17

Re: pic: Shaker Robotics Complete Chassis
 
Quote:

Originally Posted by DampRobot (Post 1118410)
I was wondering why you decided to go 6wd with a "wide" robot.

Quote:

Originally Posted by EricLeifermann (Post 1118415)
I assume that its so they can cross the barrier...

Actually it serves two purposes. First, wide robots are easier to fit three to a bridge. We were uncomfortable with hanging wheels off the edge of the ramp to balance three without knowing if we had enough weight to load the side that is on the bridge.

Second, it gives a wide opening for our intake while eliminating the need for a "drop down intake" that some long robots are utilizing this year.

Fun fact, this robot will be unable to cross the barrier. Bridge only.

Quote:

Originally Posted by sometimestommy (Post 1118414)
Are those the toughbox micros?

Nope. The gearboxes are custom, but based off the toughbox.We added two gears per side in order to "streamline" the gearboxes. It doesn't really serve a purpose other than looking nice and keeping them out of the way.

sometimestommy 02-02-2012 10:18

Re: pic: Shaker Robotics Complete Chassis
 
Quote:

Originally Posted by JackS (Post 1118421)
Nope. The gearboxes are custom, but based off the toughbox.We added two gears per side in order to "streamline" the gearboxes. It doesn't really serve a purpose other than looking nice and keeping them out of the way.

Very nicely done. Good luck in competiton!

jwfoss 02-02-2012 10:21

Re: pic: Shaker Robotics Complete Chassis
 
Jack and the rest of FRC2791,

It looks like you are going to need to keep some windex around to remove the finger prints.

Seriously clean and simple. Welcome to the Colson Performa wheel club.

Brandon Holley 02-02-2012 10:50

Re: pic: Shaker Robotics Complete Chassis
 
Lookin good Shaker. Very clean.


Quote:

Originally Posted by jwfoss (Post 1118424)
Seriously clean and simple. Welcome to the Colson Performa wheel club.

Our club is growing by the year Foss.


-Brando

lemiant 02-02-2012 12:43

Re: pic: Shaker Robotics Complete Chassis
 
Gorgeous! I'm glad to finally see some people going wide-orientation

thefro526 02-02-2012 13:55

Re: pic: Shaker Robotics Complete Chassis
 
And the battle for best looking EWCP bot has begun.

JamesCH95 02-02-2012 14:06

Re: pic: Shaker Robotics Complete Chassis
 
Nice! I'll see you at GSR :cool:

JackS 02-02-2012 14:22

Re: pic: Shaker Robotics Complete Chassis
 
Quote:

Originally Posted by thefro526 (Post 1118531)
And the battle for best looking EWCP bot has begun.

Is this CAD or IRL? Because everyone knows Gary can out CAD all of EWCP combined. However, I'm still going to try and give him a run for his money.


All times are GMT -5. The time now is 07:11.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi