Chief Delphi - Flashing Yellow Jaguar

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Flashing Yellow Jaguar (http://www.chiefdelphi.com/forums/showthread.php?t=101790)

techno4229

02-02-2012 16:06

Flashing Yellow Jaguar

ok we are rookie team and im having problems with the motor controls im using labview but when i leave everything on defualt when i followed tutorial i ran the file and it said everything was working but i get a yellow flashing light in the black jaguar and when i use the joysticks nothing happens to the motors any help vets or anyone who knows what to do???:ahh:

EricH

02-02-2012 16:30

Re: Flashing Yellow Jaguar

Check your connections. The yellow flashing light on the Jaguar means no signal.

Some other things to check:
--DB37 cable from the second module to the Digital Sidecar
--PWM orientation from Sidecar to Jaguar (had that with a team last week)
--Robot code loaded
--Robot enabled in teleoperated

What is the RSL LED on the Sidecar doing?

dyanoshak

02-02-2012 18:15

Re: Flashing Yellow Jaguar

Some of the ribbon cables in the kit were not assembled correctly:

Quote:

Originally Posted by dyanoshak (Post 1106994)

Also, check to make sure that your ribbon cable was assembled correctly. See this document from the FIRST website: DB37 Ribbon Cable Assembly Rework Instructions

This was posted in the team updates, be sure to follow them!

KennyLives

02-02-2012 20:30

Re: Flashing Yellow Jaguar

Learn to speak English ;) Then you may want to check your ribbons, as there were some defective ones sent out.

techno4229

13-02-2012 13:28

Re: Flashing Yellow Jaguar

Quote:

Originally Posted by EricH (Post 1118649)

um...

--PWM orientation from Sidecar to Jaguar (had that with a team last week)
--Robot code loaded

i need help loading the robot code i enable in teleoperated and it for the main drive any clue what to do?

All times are GMT -5. The time now is 15:17.