FPGA incorrect version or revision
 

I've programmed the simple motor control example on the driver station and another Win7 laptop, they both fail to run the drive motor in my workbench setup.

Using a probe on the "motor open" "Motor controller device ref" wire I get this message on both systems.

I'm unable to locate the FPGA version, does anyone know where I might find it?

Loaded FPGA has incorrect version or revision.
Library expecting Version 2012, Revision 1.6.4.
FPGA_SystemOpen.vi>>FPGA_SystemAsync VI Agent.vi
<time>06:28:06 02/05/2012<unique#>614

Re: FPGA incorrect version or revision
 

Have you reimaged your cRIO with the 2012 image?

Re: FPGA incorrect version or revision
 

Yes, I've been using the imaging tool that you pointer me to earlier today.
All the slots are green and the image displayed in the window is FRC_2012_v43.zip which I believe is the desired V43.

Re: FPGA incorrect version or revision
 

Oops I stand corrected, the version in the upper window on the discovery line indicates the FRC_2011_V28.
I'm formatting and installing V43 now.

Re: FPGA incorrect version or revision
 

All is now well, I was reading the wrong window.