Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)
-   -   Ip Isuess. (http://www.chiefdelphi.com/forums/showthread.php?t=102342)

Luiz12 09-02-2012 00:04

Ip Isuess.
 
So basically the netbook was running fine but I decide I wanted to go on the internet so I set the IPv4 settings back to auto ( I wrote down the original IP) but when I wanted to connect again to it, I replaced the IP address but it will no longer connect to the router. Since I didn't change anything on the router it must be the netbook. MY DNS is blank could that be it... or is it the subnet mask, the Default gateway is left blank is that okay?

nitneylion452 09-02-2012 18:27

Re: Ip Isuess.
 
Subnet mask should be 255.0.0.0

Default gateway is 10.te.am.1

I don't think this should make a difference.

Another option is that your netbook is not set to connect to the robot's network. Go to your wireless networks and check to see if you are connected.

Hope this helps.

tomy 09-02-2012 18:33

Re: Ip Isuess.
 
Ip: 10.xx.yy.6

where xx.yy is your team number

example:

10.30.38.6

Subnet Mask: 255.255.255.0

kinganu123 11-02-2012 18:08

Re: Ip Isuess.
 
Putting your number in the driver station fixes your IP settings

Keyreaper 11-02-2012 18:14

Re: Ip Isuess.
 
Quote:

Originally Posted by kinganu123 (Post 1124495)
Putting your number in the driver station fixes your IP settings

Only if you have the driver station set up to automatically configure your network adapters... On my driver station I manually set up my IP address for specific reasons.


All times are GMT -5. The time now is 06:12.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi