Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Gyro (http://www.chiefdelphi.com/forums/showthread.php?t=102413)

2869Robotics

09-02-2012 21:18

Gyro

How would I wire up the gyro? Where would I connect the gyro to? Thanks in advance.

mikets

09-02-2012 21:25

Re: Gyro

Hook the gyro to an analog input channel. 3 pins: +5 to +5, Gnd to Gnd and ANA to signal.

slijin

09-02-2012 21:40

Re: Gyro

Quote:

Originally Posted by mikets (Post 1123421)

Hook the gyro to an analog input channel. 3 pins: +5 to +5, Gnd to Gnd and ANA to signal.

If you're using the KOP gyro, remember to use the RATE pins, not the TEMP ones.

All times are GMT -5. The time now is 11:08.