Chief Delphi - Question

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Question (http://www.chiefdelphi.com/forums/showthread.php?t=102487)

Dale Radcliff

10-02-2012 20:08

Question

Can I wire the fan of a Victor independently, or with the power wires of a motor?

BurkeHalderman

10-02-2012 20:27

Re: Question

We soldered the fan wires directly to the victor power wires then screwed them to the terminals.

DonRotolo

10-02-2012 22:20

Re: Question

Best practice is to power the fan from the power input wires to the victor

slijin

11-02-2012 00:23

Re: Question

Quote:

Originally Posted by DonRotolo (Post 1124038)

Best practice is to power the fan from the power input wires to the victor

[R58-D] The supplied fans attached to speed controllers may be powered from the power input terminals.

If by independently you mean a separate power source, then no, that is illegal per R36.

DonRotolo

11-02-2012 11:20

Re: Question

And the fan must certainly NOT be wired to the output terminals of the victor

All times are GMT -5. The time now is 18:02.