Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   Team 61 driving (http://www.chiefdelphi.com/forums/showthread.php?t=102512)

Mike Norton 11-02-2012 07:58

Team 61 driving
 
Robot is 90% done just waiting for the rollers to be painted.

http://youtu.be/BQ1mGk50OFc

Billfred 11-02-2012 08:43

Re: Team 61 driving
 
Looks solid--love your bridge pusher.

I'm looking at the back as you get off the bridge, and it doesn't look like a normal shooter. Something hiding out there?

avanboekel 11-02-2012 09:33

Re: Team 61 driving
 
Is it tough turning with the tank treads?

Mike Norton 11-02-2012 09:38

Re: Team 61 driving
 
Turning is not a problem. If you set up the tracks right you will not have a problem. Are first track drive robot was in 1996 since then we have made many changes to improve the track system.

cire 11-02-2012 18:12

Re: Team 61 driving
 
Looks very nice.

Is that bridge weighted like competition bridge?

Mike Norton 11-02-2012 18:15

Re: Team 61 driving
 
The bridge is close enough to practice on.

bam-bam 11-02-2012 18:20

Re: Team 61 driving
 
Did you all specifically choose tank treads for easier balancing on the bridge?
I'm interested in hearing why you all chose tank.

Either way- completely solid robot! Looks like very sleek!

itaipelles 11-02-2012 18:22

Re: Team 61 driving
 
Very nice!
What motor do you use to get the bridge down? or is it pneumatic?

Mike Norton 11-02-2012 18:53

Re: Team 61 driving
 
Code:

Did you all specifically choose tank treads for easier balancing on the bridge?
I'm interested in hearing why you all chose tank.

Why we picked the track drive:
1) Can go over the middle bar very easily.
2) Can balance very easily.
3) Very hard to be pushed when scoring.
4) If we think of defense then we could play defense but not on our top list.

Code:

What motor do you use to get the bridge down? or is it pneumatic?
The van door motor. very nice for this job.

itaipelles 11-02-2012 18:56

Re: Team 61 driving
 
And do you gear it down? Or just directly power the appendage?

Mike Norton 11-02-2012 18:58

Re: Team 61 driving
 
Code:

And do you gear it down? Or just directly power the appendage?
Yes we gear it down.

itaipelles 11-02-2012 19:01

Re: Team 61 driving
 
Ok, Thanks a lot, and good luck this year!

TeamUpNext3528 12-02-2012 18:58

Re: Team 61 driving
 
Wowowow! Looks nice guys! Looks very good! Does the robot shoot?

Here is our robot,

http://www.youtube.com/watch?v=pBHvrUFlFZE

TeamUpNext3528 12-02-2012 18:59

Re: Team 61 driving
 
Very nice! It looks like a very sturdy robot. Does it shoot?

Here is our robot,
http://www.youtube.com/watch?v=pBHvrUFlFZE

Mike Norton 15-02-2012 12:47

Re: Team 61 driving
 
Quote:

Does it shoot?


Here is a demo of our final robot

http://youtu.be/JUuil6OpMHM

Auto mode

http://youtu.be/oq-iFNi_Du8


All times are GMT -5. The time now is 18:28.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi