![]() |
Team 3316 Preview!
Hi everybody,
We know, the design isn't the most common one... But we weren't sure that we will be able to shoot accurately, so we chose something simpler. We will be able to pick up balls from the ground, lift them, and score to the middle hoops. ![]() Comments? thx :P Team 3316 By the way, we are still working on the bridge pusher. We ran some tests, and the window motor isn't strong enough, and even the van door motor has troubles... What motor do you guys plan to use for this task? |
Re: Team 3316 Preview!
Oh my lord....
Something tells me you took after 47 in 2000. Looks great and absolutely sure to wow everyone! |
Re: Team 3316 Preview!
If this thing is fast, accurate and reasonably well driven, I belt you'll give half of the 'Shooters' in the field a run for their money.
Well done. |
Re: Team 3316 Preview!
Very cool, I was wondering when we were going to see someone post up something like this. Great work, and good luck this year.
|
Re: Team 3316 Preview!
pretty cool. we tossed around a simular idea, but in the end oped to go with a shooter. do you have any video you'd be willing to share? i'm quite curious to see it in action :P
|
Re: Team 3316 Preview!
this looks just like last years robot O.O!!!!
|
Re: Team 3316 Preview!
Very Similar to a concept toyed with but went with a shooter in the end. Good to see someone made it work.
One thing, though. The bumpers are gonna add another 2 inches in front. Just hope that doesn't kill your dumper at the end of the day. |
Re: Team 3316 Preview!
Thanks a lot guys!
I am quiet surprised to get such encouraging comments, it really made my day :) Quote:
Quote:
|
Re: Team 3316 Preview!
Very good, job. Even if you are just going for the second hoop, from experience, I know that there will be many teams who have a shooter, but are a lot less consistent than you. Especially good job deciding to go with the simpler, design.
|
Re: Team 3316 Preview!
The robot looks great, my team used the same concept for VEX Gateway this year and it worked great. I just wanted to make sure that you guys had looked into rule R02:
[R02] The Robot must satisfy the following size constraints: a.horizontal dimensions must not exceed 28 by 38 in., b.the absolute height must not exceed 84 in., c.the height of the Robot at the start of the match must not exceed 60 in., d.any appendage may not extend more than 14 in. beyond the frame perimeter, and e.no other part of the Robot may extend beyond the vertical projection of the Frame Perimeter (with the exception of minor protrusions permitted per [R01-2]). Specifically, d and e. When your arm is going up, it is going way out of the 14" allowed from the perimeter. |
Re: Team 3316 Preview!
Quote:
|
Re: Team 3316 Preview!
When it's halfway up, it would be a lot more than a foot.
|
Re: Team 3316 Preview!
Quote:
|
Re: Team 3316 Preview!
Quote:
The ball holder is lifted vertically, and then turned to almost 90 degrees. Therefore, it will not violate R02, and will only be something like 13'' outside the frame perimeter. but thx for your concern :) |
Re: Team 3316 Preview!
Quote:
|
| All times are GMT -5. The time now is 22:58. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi