Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Shaker Robotics Shooter (http://www.chiefdelphi.com/forums/showthread.php?t=102684)

JackS 13-02-2012 10:21

Re: pic: Shaker Robotics Shooter
 
Quote:

Originally Posted by Taylor (Post 1125595)
Underscored for truth.
We have our camera mounted on the same platform as our turreted shooter; the vibrations are quite severe.

Is there a known remedy for this problem? Perhaps mounting the camera on some foam to try and reduce the vibrations?

MrForbes 13-02-2012 10:31

Re: pic: Shaker Robotics Shooter
 
I'm guessing we're going to discover the camera vibration issue some time tonight...should be entertaining.

Sh1ine 13-02-2012 13:27

Re: pic: Shaker Robotics Shooter
 
Quote:

Originally Posted by CalTran (Post 1125580)
Oh. Those do not need air adjustment. :rolleyes: I like that idea then. Next question would be what system would be used to know the placement of the hood? First thought would have been a pot or an encoder, but I'm not sure where one would be mounted to be used.

If you look at the render there is a piece of aluminum that is bent on the right hand side as you look at it. A pot will be inserted in there and held in place with a simple piece of Lexan and double sided tape attached to the base (not shown here)


All times are GMT -5. The time now is 08:14.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi