Pneumatics Question
 

Posted by Thomas A. Frank.

Engineer on team #121, The Islanders/Rhode Warrior, from Middletown (RI) High School and Naval Undersea Warfare Center.

Posted on 1/22/2000 1:38 PM MST



Hello All;

Has anyone else had problems pressurizing their tank?

The tank has a 1/4 fitting (red) on it. The kit contains some 1/4 line. So far, so good...however, the 1/4 line will not properly mate with the gray (metric) fittings, and there isn't another 1/4 (red) fitting in the kit...and the metric line that does mate with the gray fitting won't mate with the 1/4 inch fitting.

What am I doing wrong?

Tom Frank

Never Mind - missing part! Re: Pneumatics Question
 

Posted by Thomas A. Frank.

Engineer on team #121, The Islanders/Rhode Warrior, from Middletown (RI) High School and Naval Undersea Warfare Center.

Posted on 1/22/2000 1:51 PM MST


In Reply to: Pneumatics Question posted by Thomas A. Frank on 1/22/2000 1:38 PM MST:



Hello All;

Now that I know I'm missing a part, I'll call FIRST.

Oh well.

Tom