Chief Delphi - Servo Motor Trouble

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Servo Motor Trouble (http://www.chiefdelphi.com/forums/showthread.php?t=102743)

gabrielc97

13-02-2012 19:32

Servo Motor Trouble

Hey, we have been having trouble with servo motors. i have been reading and i found out that we need a jumper. can someone please tell me what that is? any help is appreciated. Thanks!

BrandonGlatz

13-02-2012 19:35

Re: Servo Motor Trouble

What are you trying to connect them to?

EDIT: Silly me, I realize now what you are talking about. On the sidecar next to the pwm out connector there are two pins. For servos, these need to be bridged. The jumpers are what are on hard drives and such. Look like these

gabrielc97

13-02-2012 19:37

Re: Servo Motor Trouble

we are connecting the servo to the PWM connection ports.

gabrielc97

13-02-2012 19:47

Re: Servo Motor Trouble

Thanks, but are those included in the kit of parts?

mikets

13-02-2012 20:12

Re: Servo Motor Trouble

KOP checklist page 17:

Quote:

Jumper
female, 2-pin shunt, black or white
PN: 68786-102LF

You should have 4 of them.

DavidGitz

13-02-2012 21:28

Re: Servo Motor Trouble

Your local Radio Shack usually carries them too.

All times are GMT -5. The time now is 11:05.