Chief Delphi - Volts.

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Volts. (http://www.chiefdelphi.com/forums/showthread.php?t=102793)

mtnteam

14-02-2012 11:16

Volts.

the VOLTS output on my driver station, is not being updated. It's stuck at about 17.5 volts.

Joe Ross

14-02-2012 11:46

Re: Volts.

Are you in compliance with [R64]?

Ether

14-02-2012 12:02

Re: Volts.

Quote:

Originally Posted by Joe Ross (Post 1126408)

Are you in compliance with [R64]?

... and [R36] paragraph 1 :)

mtnteam

14-02-2012 12:09

Re: Volts.

Okay great ill try it out. I have found this - http://frc-manual.usfirst.org/viewSingleItemMap/705

is that what your referring to?

EDIT:

We do have this installed and setup. Still have no volts.

Alan Anderson

14-02-2012 13:13

Re: Volts.

Quote:

Originally Posted by mtnteam (Post 1126388)

the VOLTS output on my driver station, is not being updated. It's stuck at about 17.5 volts.

Try a different analog breakout. That sounds like the reading you'd get if one of the resistors in the battery sense voltage divider is open or missing.

mtnteam

14-02-2012 14:08

Re: Volts.

okay we will try it.

kramarczyk

14-02-2012 14:14

Re: Volts.

I ran into a team with this issue during an inspection last year. It was discovered that they wired the 24V from the PD to the analog bumper instead of the solenoid bumper. I believe that they had pulled the cRio as part of thier witholding and accidentally swapped the connectors when reinstalling it.

All times are GMT -5. The time now is 11:24.