Chief Delphi - Team 61 Final Robot

Page 1 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)

- - Team 61 Final Robot (http://www.chiefdelphi.com/forums/showthread.php?t=102815)

Mike Norton

14-02-2012 16:38

Team 61 Final Robot

Here is a demo of our final robot

http://youtu.be/JUuil6OpMHM

Auto mode

http://youtu.be/oq-iFNi_Du8

dellagd

14-02-2012 16:40

Re: Team 61 Final Robot

Nice! Looks solid.

muzikluvr312

14-02-2012 16:42

Re: Team 61 Final Robot

Cool robot! I really like it. :)

muzikluvr312 (Team 3133)

Justin Montois

14-02-2012 16:49

Re: Team 61 Final Robot

Awesome job! I love it for two main reasons. I think it's incredibly simple, and incredibly consistent.

Even though you are shooting in the low goal I think if you can grab 8 point in auto, add a 5-6 points during TeleOp and then be good at balancing you will do well at your regionals. Also, your robot is DONE with a week to go, your drivers will be better for it. Can't wait to watch you guys all year. Keep up the good work.

jblay

14-02-2012 16:50

Re: Team 61 Final Robot

Really interesting design. I suspect that it will be wildly more successful than the majority of teams that have shooters for the top hoop who just end up missing every shot or at least 1/3. Good luck to you guys in 2012 and I look forward to seeing how this works out for you guys.

Mike Norton

14-02-2012 17:02

Re: Team 61 Final Robot

Our team Motto is: “Simplicity is the ultimate sophistication.” ~Leonardo DaVinci

KevinGoneNuts

14-02-2012 17:41

Re: Team 61 Final Robot

The numbers on the front of the bumpers have to be on the same side. I saw it in the Q&A that the numbers cannot be seperated. I dont remember which one. Just a heads up. Nice robot though!

Mike Norton

14-02-2012 17:50

Re: Team 61 Final Robot

Thanks for the update

Kevin Sevcik

14-02-2012 17:53

Re: Team 61 Final Robot

This is the Q&A:

Quote:

Q. We are deciding to use a square U frame. So, we have to split the 4th bumper into 2 sections. Because of this, we can't decide how to place "3490" on our Bumper. Should we place the 4 numbers on 1 side, or should we split 34 and 90 across the Bumper. R35 doesn't explain how to handle this situation. FRC3490 2012-01-13
A. Per [R35] team numbers must be "clearly visible from a distance of not less than 100 ft, so that judges, referees, and announcers can easily identify competing Robots." Thus they may not be obscured in any way (disconnected, out of order, rotated, upside-down, mirror imaged, etc).

Mike Norton

14-02-2012 20:06

Re: Team 61 Final Robot

Quote:

disconnected

What do they mean about this? I figure if they can look from the front they will see 6 1. I did not see you had a limit to the space between your numbers.

I order more numbers so I can put 61 on both sides if we have to.

JB987

14-02-2012 20:14

Re: Team 61 Final Robot

Responses in Q and A not long ago specifies that you can only have exactly 4 team number placements, one on each side of the bot and you may not split your number either (thanks Eric for pointing this out in past thread).

Mike Norton

14-02-2012 20:29

Re: Team 61 Final Robot

I guess we rip off one side :( it is nice to know now then later. thanks for the heads up.

liam.larkin

14-02-2012 20:47

Re: Team 61 Final Robot

very nice.....quite effective.....I have a quick question. What motors/device are you using on that arm thing that pushes down the ramp???

Mike Norton

14-02-2012 21:09

Re: Team 61 Final Robot

Quote:

What motors/device are you using on that arm thing that pushes down the ramp???

The Van door motor. Very good for doing this.

scree0114

14-02-2012 21:12

Re: Team 61 Final Robot

Is it legal to use a laser pointer for aiming

All times are GMT -5. The time now is 18:25.

Page 1 of 2

Show 100 post(s) from this thread on one page