pic: Team 597
 

Re: pic: Team 597
 

How are you mounting the bumpers?

Re: pic: Team 597
 

My question exactly

Re: pic: Team 597
 

I was wondering about the bumpers too. Plus I see the shorter sticks out the front, how does it sit in its starting position?

Re: pic: Team 597
 

I like big robots! How much does it weigh?

Re: pic: Team 597
 

What have to done to counteract the high center of gravity, if any at all?

Re: pic: Team 597
 

your robot looks a lot like ours...8 wheels, poly cord movers....nice bot.

Re: pic: Team 597
 

I would also be concerned about your turreted shooter going outside the frame. Even if it is your one appendage, it looks as through there could be a moment when the corner of the turret AND one of your 500 motors are outside of the frame at the same time. Which would be illegal as they are not one contiguous mechanism.

However, you still have four days to make any changes to your robot, so do not be discouraged!

(and it could just be the camera angle)

-Mcgurky

Re: pic: Team 597
 

did someone misread the weight limit? ;)

Thing looks like a beast... good luck.

Re: pic: Team 597
 

Must be the angle...it only weighs about 95 pounds right now. Why what is the weight limit, like 80 pounds? ;)

Re: pic: Team 597
 

Of course it's the angle - you know the camera adds 10 pounds, right?

- Mr. Van
Coach, Robodox