Chief Delphi - How to use igus chain.

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - How to use igus chain. (http://www.chiefdelphi.com/forums/showthread.php?t=103225)

FrankJ

30-05-2012 19:31

Re: How to use igus chain.

Maybe a quantum transport mechanism? :0 The heat gun required to reassemble the ball didn't get by tech inspection.

We attached our wire bundle on the outboard edge of the turret & high on the support frame: allowing a loop to hang down. We used spiral wrap to keep it compact & made sure there was no perturbations on the robot for it to hang on. We easily got +- 180 degrees.

Camren

30-05-2012 21:59

Re: How to use igus chain.

Quote:

Originally Posted by mikemat (Post 1172045)

That makes more sense. I thought he was recommending you route the wires up through the axis of rotation, in the middle of the turret.

I actually was actually unsure of how my theory would work until I realized a fixed point above the center of rotation would do the trick.

bstuwe

01-06-2012 12:53

Re: How to use igus chain.

Igus actually offers several non-linear products that may be beneficial for the application. The following links will take you to a couple of them.
http://www.igus.de/wpck/default.aspx...tband&CL=DE-en
http://www.igus.de/wpck/default.aspx...7085&C=DE&L=en
http://www.igus.de/wpck/default.aspx...2899&C=DE&L=en

All times are GMT -5. The time now is 05:45.

Page 2 of 2

Show 100 post(s) from this thread on one page