Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Keeping PWM cables in Jags (http://www.chiefdelphi.com/forums/showthread.php?t=103279)

gyroscopeRaptor 19-02-2012 14:45
Keeping PWM cables in Jags
 
We've had a few critical PWM cables to the jags controlling our pickup mechanism fall out at the jaguars. We are using silicone caulk to try to keep them in but it's failed once and we are looking for alternative ways to keep the cables in, preferably ways that can be undone when we want them and ways we can use and set (in the case of caulk) before midnight Tuesday.

Ether 19-02-2012 14:47
Re: Keeping PWM cables in Jags
 
Quote:
Originally Posted by gyroscopeRaptor (Post 1130210)
We've had a few critical PWM cables to the jags controlling our pickup mechanism fall out at the jaguars. We are using silicone caulk to try to keep them in but it's failed once and we are looking for alternative ways to keep the cables in, preferably ways that can be undone when we want them and ways we can use and set (in the case of caulk) before midnight Tuesday.
Are you routing the PWM wires thru the plastic hooks that are provided in the front of the Jag specifically for that purpose?

gyroscopeRaptor 19-02-2012 15:09
Re: Keeping PWM cables in Jags
 
Quote:
Originally Posted by Ether (Post 1130213)
Are you routing the PWM wires thru the plastic hooks that are provided in the front of the Jag specifically for that purpose?
Now we know what those are for! Thanks much.

plnyyanks 19-02-2012 15:35
Re: Keeping PWM cables in Jags
 
And if you need something else to secure them: hot glue, and lots of it. Of course, it might be hard to get the cables back out...


All times are GMT -5. The time now is 17:50.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi