Re: Wiring Victor output to both motor and analog in
 

Aha, see kids, this is why you also link to a document and a page when you're referencing it, so someone can tell you accurately and quickly why you're wrong :cool: Thanks for the heads up Joe.

Still, the general point of my post remains, a divider such as the one shown in the (old) schematic should be valid for your application, as is the point about the low pass filter.... and the fact that you should use an encoder instead ;)

Matt

Re: Wiring Victor output to both motor and analog in
 

Here's version 6

Voltage divider so it goes down to 6.