Autonomous Buzzer Beater
 

CD,

I know the *only* place to ask for rules clarification is the official Q&A.

Unfortunately, my team's Q&A account has been stuck on "question pending" since the beginning of build season, and I can't ask any more.

My question is:

How many points are awarded for a shot that is already in the air when autonomous period ends, but scores shortly afterwards?

This would be for an "autonomous buzzer beater."

My interpretation of the rules says 3pts.

My gut says it should be 6pts, in the best interests of the game.

Any idea?

Re: Autonomous Buzzer Beater
 

I would agree with this interpretation.

The problem with trying to do anything else is that the automated scoring system has no way to determine when the ball left the robot, it only knows when it passes through the sensors.

Re: Autonomous Buzzer Beater
 

There's an answer to this on Q & A.

Hope that helps, seems pretty definitive.

Re: Autonomous Buzzer Beater
 

Per Q&A response to a questions asked by FRC1741 under <G39>:



This implies that it must enter the hoop DURING hybrid to COUNT as hybrid points.

Re: Autonomous Buzzer Beater
 

I really don't like this answer from the GDC though, I wish they had looked to basketball for the way to handle this scenario. In basketball you look at whether or not the ball has left the hand of the player (in this case: contact with the robot) when the buzzer goes off (end of hybrid). Personally I think this might be an easier way to call it then whether or not the ball has entered the hoop before the buzzer. Then you have questions like: does the ball have to be in the hoop entirely at the end of hybrid or just entering the hoop? I would find that pretty hard to call. Being that robots in the act of shooting will only be in contact with the ball for a short period, I think this would be much easier to call.

Re: Autonomous Buzzer Beater
 

The problem is that it's not a "call". It's an automated ball counter that detects when a ball has gone through the hoop.

Re: Autonomous Buzzer Beater
 

Sorry don't know much about this, where is it mounted? How does it work? Is there somewhere I can see this? I honestly imagined they would count scores as they entered the chute returning them to the inbounders, as I couldn't imagine them mounting a sensor at the rim, I didn't investigate though.

Re: Autonomous Buzzer Beater
 

So if the ball enters the hoop, but hasn't yet tripped the sensor (as it's at the bottom of the chute) will it be counted for autonomous?

*According to the Q&A it should.

Re: Autonomous Buzzer Beater
 

The counter is at the end of the chute that returns scored baskets to the inbounder station.

However, given the GDC's answer, I am not sure how this will actually be implemented. Does the sensor need to be triggered during the hybrid period? Because a reasonably astute observer would say that there are instances where the ball will certainly be in the hoop, but not yet fed to the counter when hybrid expires. Or is there a delay...say a second or two...programmed in?

Re: Autonomous Buzzer Beater
 

This was exactly my fear, which lead me to believe refs may have to "call" whether or not it was a scored basket or not, furthermore, I did hear of balls lodging themselves in the return chutes, I don't know if that is a problem or concern anymore but that could also cause a close call if the ball needed to pass by the sensor to be counted as a score in hybrid. Now that I've scanned over the field drawings again, I think it may be time for another Q & A question.