Can't install FRC Driver Station Update 2012
 

We installed the DS Update from [1], and it appears to install fine. Everything goes, the installer says it's finished, and we reboot the computer. However, when we turn the driver station back on, the DS revision number is only 11.30.11.00. The inspection sheet says that the Revision must be at least 01.07.12.00 or newer. I have installed and reinstalled the update at least 3 times. I have redownloaded the file. The file was posted on the 7th, so it doesn't seem like I have the wrong file. Anyone know what's going on?

[1] http://joule.ni.com/nidu/cds/view/p/id/2263

Re: Can't install FRC Driver Station Update 2012
 

Looks like the Inspection Checklist is wrong, R80 specifies 11.30.11.00

Re: Can't install FRC Driver Station Update 2012
 

Could they have changed it when they released the inspection checklist and neglected to change the rules listing?

Re: Can't install FRC Driver Station Update 2012
 

The rule was fixed in a Team Update so I'm guessing it's the checklist that's wrong.

Re: Can't install FRC Driver Station Update 2012
 

I have seen the same phenomenon, i.e. downloaded and installed update but the version number does not change. I also agree that the update to R80 should correct this. However, not all inspectors are experts in the details rules. It would be good to have this resolved long before the first competition.

Has anyone posted this as a Q&A question?

Re: Can't install FRC Driver Station Update 2012
 

For anyone who didn't see the update to the Inspection Checklist, this version number has been corrected.