Chief Delphi - pic: Team 341 presents Miss Daisy XI

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Team 341 presents Miss Daisy XI (http://www.chiefdelphi.com/forums/showthread.php?t=103579)

Re: pic: Team 341 presents Miss Daisy XI

Quote:

Originally Posted by Jared341 (Post 1168255)

... add in some killer software ...

Gee, I wonder where this came from Jared. :P

Congratulations on an amazing season. I can only dream of having such a dominating performance all season long.

It was cool to watch this robot evolve from the start.

-Nick

Re: pic: Team 341 presents Miss Daisy XI

Quote:

Originally Posted by OZ_341 (Post 1168177)

McMaster #6075K15 is the belt we used.
It was awesome and reliable. Very little, if any stretching. No failures and tracking was simple. Just build up a crown of electrical tape under the belt and it naturally centers.
We did have to experiment with various ways of welding the belts. But that was also not too bad to figure out. This belting was just right for this application.

Awesome, well it sounds like we know what we will be using. We had quite a few issues this year with the round urethane belting rolling around and jamming our pickup and this sounds like exactly what we need, can't wait to get some to test.