[R20] and "hands off"...
 

I posted a QandA question, but wanted to get a feel from the community while I await an answer.

Why is hands off put in quotes in rule [R20]?

Does it mean that as long as the bot is in the bag, and you're not actually touching/interfacing with it you can still align final fabricated parts with it? ..or does it imply that it must remain undisturbed by humans and animal alike until transporting it to the regional?

Your experience with and insight into this matter is greatly appreciated by a 2nd year team that has never bagged'n'tagged before.

Re: [R20] and "hands off"...
 

Treat the robot as if it were crated and sitting drayage. Don't gauge new parts on the robot. Don't measure anything on the robot. Treat a bagged robot as if it is invisible, untouchable, and immeasurable. I am sure that this is the intent of the rule.

Re: [R20] and "hands off"...
 

I agree, they do not mean literally that you must keep hands off of the robot, but you must keep "Hands Off" in the sense that you can't interface with the robot at all, through the bag, or whatever. Like CH95 wrote, treat the bagged robot as if it were inside a sealed crate, somewhere else.

In other words:
Hands Off means Hands (the appendages at the end of most human arms), but "Hands Off' means also paws, feet, hooves, fins, flippers, talons, eyes, ears, fingers, toes, legs, noses, wings ..... you get the idea.

Re: [R20] and "hands off"...
 

You should probably drew up anything important in cad so you can copy it. Or take off parts that you want to copy as part of your 30 lb.

Re: [R20] and "hands off"...
 

Now i can tell you with certainty that you SHOULDN'T do that at this point.
It's probably too late if you didn't CAD it up already :(

Re: [R20] and "hands off"...
 

Why not? I've done this before...

Re: [R20] and "hands off"...
 

The taking parts off is what he was referring to.

Re: [R20] and "hands off"...
 

We really don't need to touch the robot through the bag. We withheld our shooter mechanism(s) and will bring the COTS and any fabricated parts to the regional and figure out how to attach them.

Measurements were made before bagging.

I really do want to keep the students honest and not bend any rules... but we did check to see if our red bumper cover (just got from a sewing maniac) "fit" over our bagged bumper today. I'll make sure nothing else illegal takes place!

Re: [R20] and "hands off"...
 

As was I. (Not that I don't CAD as well.) I've got parts off our robot right now. EDIT: like the gentleman above me withholding their shooter.

Re: [R20] and "hands off"...
 

I said you "shouldn't do it at this point", because that's breaking the rules. If they had taken the parts off before bag and tag, then it would be legal... but obviously its too late for that.

I can't see how you could disagree with that.

Re: [R20] and "hands off"...
 

So we should treat bagged robots like neutrinos?:p

Re: [R20] and "hands off"...
 

Oh, that point. The post that sparked this sub-conversation began in past tense, making the obvious 'point' a future recommendation of what to do during the darnit-I-need-that-part-right-before-bagging point. Surely I agree that this thread doesn't need to be told the alternate. Ok then.

Though in full honesty, the parts I'm referring to were post-bag day for us, but only because we're a MAR team.

Re: [R20] and "hands off"...
 

I guess, as long as you don't attempt to claim that bagged robots can travel faster than the speed of light.

Re: [R20] and "hands off"...
 

I'd make sure that you don't have any faulty cables on your robot to make sure you get better robot speed data.

Re: [R20] and "hands off"...
 

Yeah. When my friends told me that Einstein was wrong, and particles could travel faster than light I replied, "Give it a few weeks..."

On a more FRC-ish note, we were dead in the water last year for a match because someone plugged the ethernet cable into the wrong cRIO port. Result: velocity << c