cRio out of memory
 

Hello all,
When trying to deploy the code to the cRIO it ends up with a "Memory is Full" error immediately after trying to deploy "Robot Main", at about 2% free memory.
I see no reason for our code to take up all the available memory.

Thank you for your help.
Shai

Re: cRio out of memory
 

I would like to see some code before I can tell you a solution.

but are you using a camera because if you are not freeing the images it could kill memory pretty fast.

Re: cRio out of memory
 

Another possibility is that your code is saving images or log files to the cRio's internal storage and you've filled it all up, but I think RoboKiller's is more likely.

Re: cRio out of memory
 

We had this problem with an 8 slot cRIO because the new cRIO has more storage than previous years and the new image is larger than previous ones. So if you have a 4 card cRIO and not using it I would suggest trying that.

Re: cRio out of memory
 

Format the C-RIO using the C-RIO Imaging tool 2012 provided with the Labview installation. This will clear out the data on the C-RIO, should free the space up for your code to deploy.