Chief Delphi - cRIO Status Light

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - cRIO Status Light (http://www.chiefdelphi.com/forums/showthread.php?t=104305)

Triapod

06-03-2012 18:05

cRIO Status Light

After reimaging the CRIO to the newest version, we are unable to communicate via ping or CRIO imaging tool. The yellow status light blinks. Anyone know what is wrong?

Thanks

Mark McLeod

06-03-2012 18:24

Re: cRIO Status Light

What's the sequence of blinks?

Triapod

06-03-2012 20:09

Re: cRIO Status Light

I'm guessing the left column is flashing every 1,2,3, or 4 seconds? What would be flashing continuously then?

Mark McLeod

06-03-2012 20:18

Re: cRIO Status Light

The flash sequence would go something like:

flash, flash, flash - pause off (repeat)

Triapod

07-03-2012 15:00

Re: cRIO Status Light

It flashes once then stops and repeats

Mark McLeod

07-03-2012 15:27

Re: cRIO Status Light

The image went awry or is otherwise corrupted then.
You'll need to set the Safe Mode switch, reboot the cRIO and try with the Imaging Tool again.

All times are GMT -5. The time now is 19:05.