Chief Delphi - Last minute teaser

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Last minute teaser (http://www.chiefdelphi.com/forums/showthread.php?t=104316)

lemiant

06-03-2012 23:00

Last minute teaser

1 Attachment(s)

Removed low res pic

lemiant

06-03-2012 23:02

1 Attachment(s)

Higher Resolution: Attachment 12234

SenorZ

06-03-2012 23:06

Re: Last minute teaser

inside of a vacuum cleaner roller?

roystur44

06-03-2012 23:08

Re: Last minute teaser

plasma chamber for a flux capacitor

Mike Marandola

07-03-2012 00:35

Re: Last minute teaser

Quote:

Originally Posted by roystur44 (Post 1140469)

plasma chamber for a flux capacitor

That's what I thought too.:)

JamesCH95

07-03-2012 07:49

Re: Last minute teaser

Inside of a rapid-prototyped roller with something (fingers?) threaded into them.

gracie.

07-03-2012 10:23

Re: Last minute teaser

are those sensors or rollers?

lemiant

07-03-2012 11:25

Quote:

Originally Posted by JamesCH95 (Post 1140543)

Inside of a rapid-prototyped roller with something (fingers?) threaded into them.

Well that is impressive.

Akash Rastogi

07-03-2012 11:28

Re: Last minute teaser

Is this actually on your final robot? If so, what material did you prototype with and what machine?

JamesCH95

07-03-2012 12:59

Re: Last minute teaser

Quote:

Originally Posted by Akash Rastogi (Post 1140618)

Is this actually on your final robot? If so, what material did you prototype with and what machine?

To push my luck: nylon cord/wire FDM.

tsaksa

07-03-2012 14:05

Re: Last minute teaser

I will go out on a limb. How about.

A length of PVC pipe with a bearing pressed into the opposite end, (looks yellowish due to low exposure). Also, the ends of some bolts that attach something to the outside are peaking in through some turned and threaded custom Nylon nuts.

kws4000

07-03-2012 21:50

Re: Last minute teaser

RAIL GUN! You beat the military into getting them into projectile-based operation!

Seriously, because the thingys are staggered, and it looks like a ball wouldn't fit down this barrel, IT IS :ahh: a rotary sweeper that will take the balls up from the BallAquisitionDevice to the Shooter inside a cylindrical canister.

Honestly, we thought about something like that for 2009 but we detiremened it wouldn't be effictive because of the large holes in the balls.

Hang on, were the Moon Rocks swiss-cheesed to save weight for the field prep crew?:D

All times are GMT -5. The time now is 17:00.