| Tom Line |
10-03-2012 20:02 |
Re: [DFTF] Motor & wires...
Quote:
Originally Posted by Bill_B
(Post 1141606)
Guess: The cut PVC slides part way onto the terminals' end of the motor, leaving part of it in contact with the case and the rest forming a cylindrical barrier to accidental contact with the terminals. The slot allows the PVC ring to get past the soldered wires and then expand slightly for a friction fit with the motor's case.
If my guess is correct, is 1" of pipe enough for this?
|
Yep. We fold our wires over fairly hard so they don't stick out more than about 3/4" from the motor (or so). |
