![]() |
Non-Classmate Will not wirelessly connect
I have try almost everything I could possibly think of to get our non-classmate laptop to connect to the robot so our team can run it.
The Driverstation on the classmate still connects and runs fine, and From the non-Classmate laptop we can still run the robot from wired connection. Is there anyone out there that can provide some help? |
Re: Non-Classmate Will not wirelessly connect
Dumb questions first :):
Did you make sure your wireless card is on/enabled? Is your wireless card set to a proper static IP? |
Re: Non-Classmate Will not wirelessly connect
Yes I have set up the new laptop and fixed all the IP's to be correct. I do get an error saying watch dog not fed but that is only on the new laptop not the classmate
|
Re: Non-Classmate Will not wirelessly connect
When you say "will not wirelessly connect", what exactly do you mean? Where in the process is it breaking? Is the laptop unable to see the robot's wireless network? Does it show an error when you tell it to connect to the network (which I assume is named "522")? Does it successfully establish the wireless connection but not show communication with the robot?
Tell us in detail what you are doing, and what you expect to happen, and what happens instead. |
Re: Non-Classmate Will not wirelessly connect
Ok ill try... The problem is when I try to connect the new non classmate laptop to the d-link router currently hooked up to the cRio it will connect and disconnect repeatedly. All the Ip's are set up correctly and i folowed the FIRST manual to the letter on how to connect a non-classmate laptop to the robot.
I expect the non-classmate laptop to function like the classmate but it currently is not. But the network is seen and the connection is excellent. |
Re: Non-Classmate Will not wirelessly connect
Quote:
|
Re: Non-Classmate Will not wirelessly connect
Ok...I turn the robot on and double click the icon on the dekstop to open the driver station program. The connection light on the left goes green for a few seconds then it goes red and repeats this many times. When the same is done on the classmate laptop, the connection light holds a steady green and i can operate the robot using the joysticks.
|
Re: Non-Classmate Will not wirelessly connect
When you say "connection light", do you mean the "Communications" indicator on the Driver Station screen?
It sounds like you might have a firewall program on the computer preventing it from communicating with the robot. Make sure you've turned that off. |
Re: Non-Classmate Will not wirelessly connect
yes the communications light, i Turned off all firewalls and virus protection programs and still the same problem
|
Re: Non-Classmate Will not wirelessly connect
Do you have the classmate laptop and the non-classmate laptop running the Driver Station software at the same time?
What is the IP settings for your non-classmate laptop? |
Re: Non-Classmate Will not wirelessly connect
Both are not running at the same time and the ip on the non classmate laptop is 10.5.22.6
|
Re: Non-Classmate Will not wirelessly connect
Did you set the team number correctly inside the driver station on the one that doesn't work?
|
Re: Non-Classmate Will not wirelessly connect
i know this may be weird to say but it just so happened the wireless card in the newer laptop was not compatible with the radio. I got a usb wireless adapter and its up and running well
|
Re: Non-Classmate Will not wirelessly connect
Thank you for following up and letting us know what made it work for you.
|
Re: Non-Classmate Will not wirelessly connect
AT Chesapeake none of our laptops would connect with the field. After 2 bad match's and working thru lunch with the field supervisor we switched to a First loaner Class Mate and had no more problems. Our laptops kept searching for IP addresses.
|
| All times are GMT -5. The time now is 07:55. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi