Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Team Banner Size (http://www.chiefdelphi.com/forums/showthread.php?t=104863)

bchan1120 20-03-2012 19:27

Team Banner Size
 
I'm designing a banner for our team to hang over our pit and I'm not sure about the sizing. What's an appropriate size for a banner for a pit?

DCA Fan 20-03-2012 19:31

Re: Team Banner Size
 
Pits are usually 10'x10', so a 8-10 foot long banner, probably 2-10 feet tall.

JamesB3467 20-03-2012 19:32

Re: Team Banner Size
 
If you are going to have it in your pit, it can be no longer that 10 feet wide, because that is the pit size (10ft x 10ft) for length, however long you want, but you may have tool boxes and shelves covering it depending on your pit set up

Steve W 20-03-2012 19:37

Re: Team Banner Size
 
It could be up to 40 ft long and double sided but if too high then you couldn't get into your pit.

IndySam 20-03-2012 19:38

Re: Team Banner Size
 
Please remember that 10x10 is not a guaranteed size. Make sure to plan for less space.

Sb28000 20-03-2012 20:23

Re: Team Banner Size
 
We have a 4'x8' banner, made by a generous sponsor, that we hang in the back of our pit space. The 4' height is maybe even a little bit tall based on our set-up, with things set on a tabletop in the back of the pit - which covers some parts of our banner.


All times are GMT -5. The time now is 16:59.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi