Chief Delphi - Volts reading 0

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Python (http://www.chiefdelphi.com/forums/forumdisplay.php?f=187)

- - Volts reading 0 (http://www.chiefdelphi.com/forums/showthread.php?t=104867)

DjMaddius

20-03-2012 20:37

Volts reading 0

When I use python on the test bot, I get a volt reading of 0 on the driverstation. I havn't tested the ds.GetBatteryVoltage () yet though I plan to tomorrow. While I'm here, anyone have any idea as to how to fix this?

virtuald

22-03-2012 02:19

Re: Volts reading 0

Put the appropriate jumper on the analog sidecar. It's documented somewhere...

Keyreaper

22-03-2012 09:19

Re: Volts reading 0

If I remember correctly the jumpers should be placed on the two outer most pins on the analog controller.

DjMaddius

22-03-2012 14:22

Re: Volts reading 0

Alright, thanks guy's. I'll try it in a few and see what I get.

All times are GMT -5. The time now is 19:52.