Re: Kinect Station
 

I was a field reset volunteer at an earlier regional and, after a match had to be replayed due to Kinect interference, we were told to (physically, if necessary!) make sure no one went into the taped area during hybrid period if there was someone using the Kinect. If the crew at your regional isn't already doing the same thing, I would suggest it to them...

Our Kinect isn't working on the field only when we plug out own Kinect in the pit it works. Any ideas?

Re: Kinect Station
 

The field crew should be helping you try these things, but in general what you work on depends on what the various Kinect status's say.
Status to check:

• On the Driver Station Operation tab
  • Kinect icon (gray, red or green)
  • Two people icons (gray or green, 1 or 2 green)
• On the Driver station Diagnostics Tab
  • Kinect light (green, red, or gray)
  • Kinect : status (No Kinect, No Power, In Use, Version #)
• On the Driver Station Kinect Skeleton display
  • White Dot
  • Black
  • Green skeleton

General things to try include:

1. Connect the Kinect USB directly into a laptop USB port, NOT a hub
2. Try different USB ports on your laptop, switching with joysticks if necessary.
3. Try it with a loaner Classmate from Spare Parts.

The only thing that worked was the loaner classmate. Thanks!